Stampede 2wd (VX3) • XL Hobbies

Stampede 2wd (VX3)

136454-4

MODEL 136454-4: Stampede^® 2WD Brushless: 1/10 scale monster truck, fully-assembled, waterproof, Ready-To-Race^®, with TQi™ 2.4 GHz 2-channel radio system with Punch Control, Velineon^® 3s brushless power system, and clipless painted body. Requires: battery and charger.

Features:

35+ mph with 2s LiPo. 50+ mph with 3s LiPo (no gearing change required)
NEW Clipless Monster Truck Body with Bash-Locks™
- Clipless latches hold tight and release in seconds
- NEW Bash-Locks secure the clipless latches firmly into place for extreme bashing
- Injection-molded grille and tailgate body reinforcements
  - Superior body protection for extreme bashing
NEW Monocoque Chassis Design
- Shock towers are integrated into the chassis
  - Reinforced crossbar supports
  - Double-shear shock mounts
- Longer and wider footprint
  - Increases handling and high-speed stability
- Ultra-tough front and rear bulkheads and skid plates
  - Integrate seamlessly into the chassis
- Reinforced front bumper and fixed wheelie bar
NEW Velineon^® VX3 Waterproof Electronic Speed Control
- Large aluminum heat sink with cooling fan
- Three programmable drive profiles
  - Sport Mode - forward / brake / reverse
  - Race Mode - forward / brake
  - Training Mode™ - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set^® one-button setup
- Telemetry capable with optional accessories
- High-Resolution Linear Braking
- Compatible with 2s and 3s LiPo batteries (NiMH not supported)

NEW Velineon V3200 Brushless Motor (patent pending design)
- Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power
- 3200 Kv optimized for power and efficiency in 1/10th scale vehicles
- 5 mm output shaft
- Internal cooling fan for longer run times
- Low-maintenance design
- Efficient, high-speed ball bearings
TQi™ 2.4 GHz 2-Channel Radio System
- High-output signal delivers outstanding range
- Multi-function knob
- 30-model memory
- 3-channel micro receiver with fail-safe security
- Watertight receiver box with O-ring sealed cover
NEW Punch Control™
- Dials in the perfect launch for any surface
- Adjusts the amount of throttle applied relative to trigger pull
- Adjusts from 0-100% using transmitter's Multi-Function knob
Traxxas Stability Management^® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on power slides
- Never dulls throttle or slows the truck
NEW Double-Wishbone Suspension Design
- Maintains proper suspension geometry
- Allows huge suspension travel
- Double-shear connections
- Extreme HD suspension components and arms
  - Beefed-up with extra material for superior strength

NEW Battery Tray Design
- Battery is protected deep in the chassis
- Rugged battery strap latches shut to secure batteries
- No battery clips to lose
- Accepts many 2s and 3s battery configurations
Steering
- NEW 2057 waterproof, metal-gear servo
  - Full metal gear train for improved durability
- NEW dual-bellcrank design with integrated servo saver
Transmission and Driveline
- Magnum 272™ metal-gear transmission
- Torque-Control™ slipper clutch system
- NEW 32-pitch spur and pinion gear
- NEW heavy-duty top shaft
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
NEW XX-long Composite GTR Shocks
- Threaded shock collars for precise ride height adjustment
- Large oil capacity for consistent damping
- White powder-coated springs
- Spring retainers captured with a screw
- 3.5 mm shaft
Wheels and Tires
- Large 2.8″ black monster truck wheels
  - Removable center caps
  - Same wheel offset front and rear
- NEW Talon MXT Tires
  - Tall monster truck profile
  - Angled tread pattern for massive forward bite
Precision Hex Hardware
Rubber-Sealed Ball Bearings

What’s In The Box:

Stampede 2WD monster truck with VX3 ESC and V3200 motor
TQi 2.4 GHz radio system
High quality maintenance tools

What You’ll Need:

Batteries
Stampede 2WD Brushless requires a single 2-cell or 3-cell LiPo battery (NiMH not supported)
Charger
The Traxxas EZ-Peak^® charger 2970 is recommended for easy and fast charging performance.
AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.