Wolf Tooth ALT Performance XC Clipless Pedals are designed for commanding performance on trails and gravel roads. These pedals are lighter (326g) and thinner (16mm) than most other XC pedals, with a low stack height and more platform area (534 mm²) for control and power transfer. An open center between the cages means increased mud shedding compared to other SPD-compatible pedals.
Like other Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.
- Thinner than the competition at 16 mm (compared to the Shimano XT 8100 at 16.5 mm and the Hope Union RC at 18 mm)
- Best price to weight ratio at only 326 g (compared to Shimano XT 8100 at 340 g and Hope Union RC at 322 g)
- Bigger platform area than the competition at 559 mm² (compared to Shimano XT 8100 at 135 mm² and Hope Union RC at 420 mm²)
- Fully SPD compatible with no proprietary cleats
- Fixed Q factor of 55 mm
- 5 degrees float | 12 degrees release
- Proven axle and bearing design from Waveform Aluminum Pedals
- Designed and tested at Wolf Tooth in Minnesota, USA
Recommended
-
All SPD pedals benefit from simple regular maintenance. For best performance apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more information.
- Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms.
Compatibility
- Compatible with SPD cleats; Wolf Tooth cleats included
- Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid’s bikes and vintage bikes may have smaller incompatible threads.
Tech Specs
Weight: 326 g
Material:
Body: Forged and Post-Machined Aluminum
Axle: Satin nickel-plated chromoly steel
Binding Cage: Hard chrome plated chromoly steel; Hardware: Nickel-plated chromoly steel
Included: pedals, cleats with shims and bolts
Patent Pending