Wintec Webbers are a revolutionary synthetic stirrup strap made without buckles to reduce the lump under your thigh and provide closer contact to your horse.
They feature a webbing core for increased strength, plus hard-wearing materials for durability.
Webbers are sized in centimetres by overall length. The inch figures are a conversion for reference only.
The size code ends in the centimetre length, so a Size 0 Webber is a 60. If you are not sure, your saddle fitter or stockist can help you choose.
Take the sleeve off, then thread the looped end of your Wintec Webbers through the eye of your stirrup iron and replace the sleeve. Slide the loop over your stirrup bar, making sure your Webbers buckle below your saddle flap to avoid wear.
To secure the stirrup iron, fold the T-shaped buckle end up behind the iron and insert it into the I-shaped hole at your preferred length. Turn the buckle until the Webber sits flat and the buckle is secure, then pull the sleeve down firmly so the buckle is covered and your tack is protected.
To run them up, remove the T-shaped buckle from the riding slot and insert it in the hole at the very top of the Webber, up near your stirrup bar. You may need to lift the skirt of your saddle to see it. Run the stirrup iron up the front of the Webber, then tuck the folded Webber through the iron and pull down to secure.