Drone Solar Cleaning Agent (DSA) is a concentrated cleaning agent made for drone-based or low-pressure spraying systems used on solar panel installations. It helps remove everyday organic buildup like dust, pollen, grease, and other environmental residue from solar panel surfaces.
It’s designed for routine cleaning work on solar arrays and is applied in a simple spray-and-rinse process with a short dwell time. The formula is suitable for standard PV materials, including glass, aluminum frames, silicone seals, and anti-reflective coatings.
Testing by ÉMI-TÜV SÜD confirms compatibility with common PV module components and no impact on light transmission. Compatibility statements are also available from LONGi, JA Solar, and Runergy.
Key Features:
- Concentrated solution for solar panel cleaning
- Designed for drone and low-pressure spray application
- Removes dust, pollen, grease, and other organic buildup
- Standard dilution ratio: 1:50
- Around 5-minute dwell time before rinsing
- Works with aluminum frames, silicone seals, and coated glass
- Free from solvents, ammonia, chlorine, and bleach
- Tested for PV material compatibility by ÉMI-TÜV SÜD
Specifications:
- Dilution: 1:50
- Dwell time: ~5 minutes
- Application method: drone spraying systems or similar low-pressure equipment
- Soiling type: organic residues (dust, pollen, grease, environmental buildup)
Instructions for Use:
- Mix at a 1:50 ratio with water
- Apply evenly across the panel surface using spray equipment or drone systems
- Let it sit for about 5 minutes
- Rinse thoroughly with water