Buy It Once
You have thrown out enough gear that quit on the job: plastic bottles that taste like chemicals, coated flasks that peel, cheap mess tins that dent and rust in a season. This kit ends that cycle with one material. Solid Grade 1 titanium, 99.5% pure, worked into a 1.1L canteen and two nesting mess cups that boil, cook, and pour for decades without a coating to fail or a seam to corrode. It is a tool, built the way you build things: to outlast the person who made it.

The Material Argument
Titanium melts at 3,034 degrees F. A hot campfire runs around 1,100 degrees F. That gap is why you can set every piece of this kit directly on coals, grates, or open flame: boil water, purify any source, cook a meal, then drink from the same vessel. No liner to peel, no coating to burn off, no rust, ever. It is the same biocompatible metal surgeons implant in the human body, because nothing on earth is more non-reactive.
Campfire coals top out near 1,100°F. Set it in the fire.
Canteen, both cups, and lid together: about 12.3 oz.
1.1L canteen + 750ml cup + 400ml cup, nested into one unit.
Note: every piece is single wall titanium. It will not keep coffee hot for hours like a vacuum flask, and that is the trade: a double wall bottle can never go on the fire. This one can, which is the whole point.
On the Job, At the Fire
The canteen body is reinforced: no give when you squeeze it, empty or full. Wire handles fold flat on the cups and hinge out when you need them. Measurement marks are etched inside the cups so you can cook by eye. Rounded bottom edges heat evenly and wipe clean. Nothing on this kit is decoration. Every part earns its weight, and at 350 grams there is not much weight to earn.
In the Field
The whole set nests into one unit and locks into the included MOLLE carrying case: adjustable shoulder strap, front pocket for the lid and small gear, clasp closures that mount to your pack or belt. The campfire chain hangs a cup over flame. Fill from any source and boil it clean. This is gear you rely on, not gear you protect: drop it, scorch it, freeze it, and it reports for the next trip.

One Vessel System
A plastic bottle carries water and does nothing else. This kit fills from any source, boils and purifies it over open flame, cooks the meal, strains through the lid, and packs itself away: the 400ml cup nests in the 750ml cup, the canteen seats flush on top, and the whole stack disappears into its case. It replaces your bottle, your pot, and your cup, and weighs less than most insulated bottles do alone.

Failure Analysis
Plastic leaches and melts. Stainless steel adds nickel and chromium to every acidic drink. Aluminum hides behind a liner that peels within a year. Each failure mode below was removed from this kit at the design stage, by the material itself.
| Component | What usually fails | This kit |
|---|---|---|
| Bottle body | Plastic leaches microplastics, melts near flame | Solid Grade 1 titanium, campfire-proof to the coals |
| Inner surface | Coatings and liners peel, flake, expire | No coating exists. Bare titanium is the surface |
| Metal contact | Stainless adds metallic taste to coffee and citrus | Non-reactive: water tastes like water |
| Corrosion | Steel rusts at dents and welds, aluminum pits | Titanium cannot rust. No expiration date |
| Handles | Plastic grips melt, spot welds snap | Folding titanium wire handles, removable bails |

Specifications
| Material | Grade 1 commercially pure titanium (99.5%), ASTM B265 certified, no coatings or linings |
| Canteen | 1.1L (37 oz), reinforced body, about 7.5 x 5 x 3 in, 5.6 oz |
| Large mess cup | 750ml, folding wire handles, etched measurement marks, about 3.75 x 5.25 x 3 in, 3.7 oz |
| Small mess cup | 400ml, folding wire handles, about 2 x 5.25 x 3 in, 2.7 oz |
| Lid | Titanium with strain holes and small handle, about 5.5 x 3.5 in, 1.3 oz |
| Carrying case | MOLLE clasps, front pocket, adjustable and removable shoulder strap, about 7 x 7 x 3 in, 4.8 oz |
| Campfire chain | Included, hangs mess cups over flame for cooking |
| Nested size | 7.7 in tall with lid, 6 in wide, about 3.35 in deep |
| Total titanium weight | About 350 g (12.3 oz) for canteen, cups, and lid |
| Heat sources | Campfire, coals, gas stoves, electric cooktops |
| Care | Wash with warm soapy water before first use. Dishwasher safe |
How It Works
Stream, spigot, or lake. Fill the canteen from any source you find.
Set a cup on the coals or hang it from the chain. Boil to purify, then cook right in the cup.
Small cup into large cup, canteen on top, everything into the MOLLE case. One unit on your hip.
Important: First Time Opening the Cap
New titanium threads are tight. Forced open or cranked shut dry, titanium on titanium can bind and lock the cap in place. Take two minutes to break the threads in when the kit arrives and the cap will turn smoothly for life.
Turn the cap gently the first time. If it resists hard, stop. Do not force it.
Run water over the cap and neck threads, or rub on a little cooking oil or food grade beeswax.
Screw the cap on and off 20 to 30 times until it turns smooth and quiet.
Hand snug seals it. Cranking the cap down hard is what makes titanium threads bind.
Keep it running smooth: keep sand and grit off the threads, and rinse the canteen and cap or run them through the dishwasher after every trip. If the cap ever feels stuck, run warm water over it, work a little cooking oil into the thread line, grip it with a rubber glove, and turn back and forth in small turns until it frees up.
Before you order: This kit is single wall titanium by design, so it goes on the fire but does not insulate like a vacuum bottle. Handles conduct heat over flame: use gloves or tongs. The new cap is tight and squeaks until the threads wear in, so follow the cap break-in steps above before first use. Light scratching around the lid and cap is normal with use and completely safe.
FAQ