Written for sports decided in the head
Martial arts, gymnastics, climbing, anything judged rather than timed — the difference between a good day and a bad one is rarely physical. Competitors in those sports talk about nerves the way runners talk about hills.
This design belongs to that half of the medal cabinet. Four widths, AISI 304 stainless steel, continuous rail rather than a fixed count of hooks.
Martial arts and gymnastics medals are frequently smaller than road-race medals, so the rail takes more of them than the figures suggest.
Below are the widths this design is cut in. The honest advice for a gift is to size on the drawer, not on the wall.
Size & capacity
| Size | Steel | 1 rail | 2 rails | 3 rails |
|---|---|---|---|---|
| 35 x 8 cm | 2.5 mm | 8-12 | 15-22 | 20-30 |
| 45 x 8 cm | 2.5 mm | 13-20 | 24-36 | 34-50 |
| 60 x 11 cm | 3 mm | 21-30 | 38-55 | 55-75 |
| 75 x 11.5 cm | 3 mm | 31-45 | 55-80 | 75-110 |
Not sure which size?
Small medals mean the table understates the capacity. If between two sizes here, the narrower one usually works.
Made from one sheet, not assembled from parts
The medal holder is laser-cut from a single piece of AISI 304 stainless steel, 2.5-3 mm thick depending on the width. Nothing welded on, nothing to come loose.
Medals hang on a continuous rail rather than individual hooks, so you're limited by the width of the bar and nothing else.
Getting it on the wall
Stainless standoffs, screws, plugs and a paper template are all in the box. Tape the template up, mark two holes, drill, and it is done inside a quarter of an hour.
When it fills up
A second unit mounts flush against the first, so the wall still reads as one piece rather than two things hung near each other. The widest version holds up to 110 medals across three rails.
Shipping & returns
This medal hanger is made in the EU in our own workshop and dispatched in 2–5 working days. Fourteen days to return it.