The Windsor Alabaster Flush Mount Light sets the same scalloped, tiered alabaster shade close to the ceiling on a short brass collar, in place of the hanging chain on the Windsor pendant. The stone glows a warm honey tone when lit, while the cast-brass canopy and base finial keep the same antique-brass character — a fitting choice for lower ceilings and hallways where a hanging pendant is not practical.
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Natural alabaster — every shade is one of a kind
Each shade is cut from natural alabaster with its own veining, tone, and translucency. No two pieces look identical, and variation from the photos is expected — a mark of genuine stone, not a defect.
Scalloped alabaster shade
A tiered, scalloped shade of natural alabaster that glows warmly from within.
Ornate cast-brass fittings
The canopy and base finial are cast in brass with a raised floral and leaf motif.
Close to the ceiling
Mounts on a short brass collar with no chain, and takes one E12 or E14 bulb.
| Size | Ø 5.5″ x H 16.1″ / Dia 14cm x H 41cm |
| Mounting | Semi-flush, short brass collar |
Click to enlarge
| Material | Brass, natural alabaster |
| Body Finish | Antique brass |
| Shade Finish | Natural alabaster |
| Size | Ø 5.5″ x H 16.1″ / Dia 14cm x H 41cm |
| Light Source | 1 × E12 / E14 bulb base |
| Voltage | AC 110–240V |
| Control | Wall switch |
| Installation | Hardwired, semi-flush ceiling mount |
| Environment | Indoor, dry locations only |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
- Hardwired to a ceiling junction box — a licensed electrician is recommended.
- Handle the stone shade carefully during setup — natural stone can chip or crack if dropped.
- Dust the shade and brass fittings gently with a soft, dry cloth; avoid water, solvents, or abrasive cleaners.
- Keep away from high humidity, which can affect the stone and the brass patina over time.
- Switch off the power before cleaning or changing the bulb.
What is the shade made of?
Natural alabaster. The scalloped, tiered shade glows warmly from within when lit, and each piece has its own veining and tone.
How big is it?
It measures Ø 5.5″ x H 16.1″ / Dia 14cm x H 41cm overall, from the ceiling canopy to the base finial.
How is it installed?
It is hardwired to a ceiling junction box and controlled by a wall switch. A licensed electrician is recommended.
What bulb does it use?
One E12 or E14 bulb. A warm white 2700–3000K bulb gives the alabaster its softest glow.
How is it different from the Windsor pendant?
It mounts close to the ceiling on a short brass collar with no hanging chain, at H 16.1″ / 41cm overall — a better fit for hallways, closets, and lower ceilings. It shares the same shade design, brass finish, and E12/E14 socket.
How do I clean the shade and brass fittings?
Dust gently with a soft, dry cloth. Avoid water, solvents, or abrasive cleaners, and handle the shade carefully — natural stone can chip or crack if dropped.