The Duolune Alabaster Up Down Wall Sconce began with the idea of two moons in balance. Two spheres of natural alabaster sit on slim metal cones that point toward each other, joined by a short rod and held off the wall by a single arm. One globe glows above and one below, forming a calm, symmetrical hourglass of light.
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Both globes are cut from natural alabaster. Veining, tone, and small marks differ from piece to piece, so the two globes on one sconce will not match exactly, and no two sconces look the same.
Two Ø 4.7″ / 12cm spheres of real stone glow evenly from within.
One globe lights the wall above, one lights the wall below.
Slim metal cones point toward each other for a clean hourglass line.
A soft silver tone for cool palettes.
Sets off the white stone in strong contrast.
A warm tone that picks up the stone's amber.
| Overall height | H 13.8″ / H 35cm |
| Globes | 2 × Ø 4.7″ / Dia 12cm |
Click to enlarge
| Materials | Natural alabaster, metal |
| Body Finish | Brushed Nickel, Black, or Brass |
| Shade Finish | White natural alabaster globes |
| Light Source | G9 bulb base, 2 bulbs · warm white 3000K recommended |
| Voltage | AC 110–240V |
| Control | Wall switch |
| Installation | Hardwired to a wall junction box |
| Environment | Indoor, dry locations only |
| Best For | Beside a mirror, bedsides, hallways, staircases, living room walls |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
Yes — both globes are natural alabaster, so veining and tone vary from globe to globe and from sconce to sconce.
Two G9 bulbs, one in each globe. G9 is a small two-pin bulb, not a screw base, so use the same type for replacements.
At 13.8″ / 35cm tall with two Ø 4.7″ / 12cm globes, it suits a pair beside a mirror or bed, a hallway, or a staircase, where light up and down the wall looks best.
Yes — it hardwires to a wall junction box, so a licensed electrician is recommended.