The Sleeve Alabaster Wall Sconce mounts a slender column of natural alabaster flush to the wall, cinched at its center by a tailored sleeve, with integrated LED casting a soft glow both upward and downward through the stone. It's available in two configurations, a single column or a side-by-side pair, each in your choice of sleeve finish.
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Alabaster column & center sleeve
A slender column of natural alabaster mounts flush to the wall, cinched at its center by a tailored sleeve that contrasts with the stone.
Light that goes both ways
An integrated LED casts a soft glow upward and downward through the translucent stone — no bulb to source.
Two sleeve finishes, two configurations
Choose a Cognac Leather or Knurled Brass sleeve, as a single column or a side-by-side pair.
Cognac Leather Sleeve
A stitched cognac brown leather sleeve wraps the column's center, framed by slim brass rings.
Knurled Brass Sleeve
A knurled brass sleeve wraps the column's center, framed by slim brass rings.
1-Light
A single column, Ø 4.7″ x H 31.5″ / Dia 12cm x H 80cm.
2-Light
A side-by-side pair of columns, Ø 7.1″ x H 35.4″ / Dia 18cm x H 90cm overall.
| 1-Light | Ø 4.7″ x H 31.5″ / Dia 12cm x H 80cm |
| 2-Light | Ø 7.1″ x H 35.4″ / Dia 18cm x H 90cm (side-by-side pair) |
Click any diagram to enlarge
| Material | Natural alabaster column, brass frame, leather or knurled brass sleeve · each column shows unique natural veining |
| Light Source | Integrated LED, warm white 2700–3000K |
| Voltage | AC 110–240V |
| Control | Wall switch; dimmable version available on request |
| Mounting | Wall-mounted, hardwired over a standard wall junction box |
| Environment | Indoor, dry locations only (IP20) |
| Suitable Spaces | Bedside wall, hallway, entryway, living room |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
- Mount over a standard wall junction box; hardwired installation requires a licensed electrician and should follow local electrical requirements.
- The LED is built in — control it with a standard wall switch. A dimmable version is available on request.
- Wipe the alabaster column with a soft, dry cloth only; avoid water and cleaners, which the stone can absorb.
- Keep water and liquids away from the leather sleeve, if chosen; wipe the brass sleeve with a soft, dry cloth.
- Disconnect power before cleaning or servicing the fixture.
- Intended for indoor, dry use only (IP20).
What is the Sleeve Sconce made from?
A slender column of natural alabaster, mounted flush to the wall and cinched at its center by a tailored sleeve in cognac leather or knurled brass. No two columns are identical, since the stone's veining is natural.
What configurations and finishes are available?
A single column (Ø 4.7″ x H 31.5″ / Dia 12cm x H 80cm) or a side-by-side pair (Ø 7.1″ x H 35.4″ / Dia 18cm x H 90cm), each in your choice of a Cognac Leather or Knurled Brass center sleeve.
Does it need a bulb?
No. It uses an integrated warm white 2700–3000K LED, so there is no bulb to source.
Can it be dimmed?
The standard version works with a regular wall switch. A dimmable version is available on request — email info@vakkerlighting.com before ordering.
How do I clean the alabaster column?
Wipe with a soft, dry cloth only. Avoid water and cleaners — alabaster absorbs liquids — and keep water away from the leather sleeve, if chosen.