KT4 Clamp-On Keyboard Tray
Get the keyboard off your desktop without drilling into it
KT4 gives you the workspace and ergonomic benefits of an under-desk keyboard tray without making permanent holes in the desk. Clamp it to a compatible flat-edge desktop, lower the keyboard below the work surface, adjust the height and tilt, and reposition the tray later if your setup changes.
No-drill ergonomics
More than a simple clamp-on keyboard shelf
4.1-6.5 in
Lower the keyboard
Choose the keyboard height below the desktop instead of accepting one fixed position.
Neutral or negative tilt
Adjust the tray angle to fine-tune how your hands and wrists meet the keyboard.
Slide it under the desk
Tuck the keyboard away when you want more open desktop space.
Clamp on. Move later.
No drilling means the tray can move when your desk, monitors, or workspace changes.
Fit + specifications
Check the desk edge before you order
| Mount type | Clamp-on; no drilling required |
|---|---|
| Desktop fit | Flat-edge desktops up to 1.25 in thick |
| Keyboard height | Approx. 4.1-6.5 in below desktop height |
| Tray angle | Neutral or negative tilt |
| Usable surface | Approx. 27.5 × 10.2 in |
| Storage | Slides beneath the desktop when not in use |
| Installation | Tool-free clamp installation on a compatible desk edge |
Before ordering: confirm desktop thickness, a flat clamping edge, and enough clear space beneath the desk for the tray and its travel.
Why clamp-on matters
Ergonomic adjustment without committing your desk to it
A practical option for desks you do not want to drill
Permanent screw-mounted trays make sense when the workstation will never change. KT4 is built for the opposite situation: home offices, shared desks, temporary setups, and workstations that may need to be rearranged later.
- No holes drilled into the desktop.
- Installs without tools on a compatible desk edge.
- Can be removed and repositioned as the workspace changes.
- Moves the keyboard below the desktop while preserving valuable work surface above.
See KT4 in action
Clamp, adjust, type, and slide it away
Frequently asked questions
KT4 fit and adjustment questions
Will KT4 fit my desk?
KT4 is intended for compatible flat-edge desktops up to 1.25 in thick. Check the clamping edge and clear space beneath the desk before ordering.
Do I need to drill holes or use tools?
No. KT4 uses a clamp-on mounting system designed for tool-free installation on a compatible desktop.
How far below the desktop can I position the keyboard?
The keyboard surface adjusts approximately 4.1-6.5 in below desktop height.
Can I adjust the keyboard angle?
Yes. KT4 supports neutral or negative tilt so you can change the keyboard angle to suit your setup.
Can I move KT4 to another desk later?
Yes. Because KT4 clamps to the desk instead of using permanent screw mounting, it can be removed and repositioned on another compatible desktop.
How much usable space does the tray provide?
The usable tray area is approximately 27.5 × 10.2 in.