Product Description

For when you need to raise the pH value of your hot tub to the required 7.2 to 7.6 pH.

•   Raises pH level
•   Promotes bather comfort

The ideal pH levels are between 7.2-7.6, promoting bather comfort, optimum chemical efficiency and protection of Hot Tub equipment. Test the pH of your water, and if it is below 7.2, use pH plus to raise it.

Application Instructions

•   Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned on, preferably near to the water inlets to aid distribution.
•   After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments
  may be required.

General Dosing Precautions

•   Wear eye and face protection and ensure granules are not blown back into your face.
•   Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
•   When pre-dissolving always add product to water and not vice versa.

Important Usage/ Storage Information

See risk and safety phrases on container!