Product Overview
The Total Light TL-HS100-AZ Hardscape Ledge Light is a compact 12V integrated LED fixture designed to place warm, controlled illumination beneath ledges and along built outdoor features. It can be used to light outdoor kitchens, stone and paver structures, brick or paver columns, retaining walls, seating walls, steps and similar hardscape surfaces where the light source should remain visually discreet. The fixture’s shielded design directs illumination toward the surface below, helping reduce direct glare while defining edges, textures and changes in elevation after dark.
Its pivoting light bar gives the installer added control over where the light is aimed. This is useful when the fixture is mounted beneath a capstone, ledge or projecting surface and the beam needs to be adjusted toward a wall face, tread, counter edge or adjacent walking area. A 10-foot lead wire is attached to the fixture, providing flexibility when routing the connection back through masonry, behind a structure or toward the main low-voltage cable.
The integrated LED system uses four diodes to produce 100 lumens of 2700K warm-white light while consuming 1.5 watts. Because the LED source is built into the fixture, no separate lamp is required. The fixture is finished in Total Light’s AZ finish, carries an ETL mark and is covered by the current Total Light hardscape-lighting warranty. Current policy provides lifetime coverage for hardscape fixtures and LED components, with six-year coverage for applicable mounting brackets. Review the Total Light Warranty for complete terms and conditions. The existing product gallery includes dimensional reference graphics and an installed application image. Review those images when planning the mounting opening, fixture position and surrounding hardscape layout.
Key Features
- 12V low-voltage hardscape and ledge light
- Integrated LED light source; no separate lamp required
- Produces 100 lumens while using 1.5 watts
- 2700K warm-white color temperature
- Four integrated LED diodes
- Pivoting light bar for directional control
- Shielded design helps conceal the light source and reduce direct glare
- 10-foot attached lead wire for installation flexibility
- Total Light AZ finish
- ETL marked
- Current hardscape warranty coverage: lifetime fixture and LED components; 6 years for applicable mounting brackets
Common Uses
- Outdoor kitchens and grill islands
- Stone, brick and paver structures
- Retaining walls and seating walls
- Wall caps and capstones
- Brick or paver columns
- Steps, stair edges and changes in elevation
- Built-in benches and raised planters
- Low-level architectural and guidance lighting
Technical Specifications
- Model: TL-HS100-AZ
- Fixture Type: Hardscape ledge light
- Operating Voltage: 12V low voltage
- Light Source: Integrated LED
- Power Consumption: 1.5 watts
- Light Output: 100 lumens
- Color Temperature: 2700K warm white
- LED Configuration: Four LED diodes
- Adjustment: Pivoting light bar
- Lead Wire: 10 feet
- Finish: Total Light AZ finish
- Certification: ETL marked
- Warranty: Lifetime hardscape fixture and LED components; 6 years for applicable mounting brackets, subject to the current Total Light Warranty
Integrated LED and System Compatibility
The TL-HS100-AZ contains an integrated 1.5-watt LED light source that produces 100 lumens at 2700K. A separate replaceable lamp is not used. Connect the fixture only to a compatible 12V low-voltage landscape-lighting system with a properly sized transformer, main cable and outdoor-rated wire connections.
Installation and Planning Notes
- Plan the fixture position before completing the surrounding masonry, paver or capstone work.
- Mount the fixture beneath a suitable ledge or projecting hardscape surface so the shielded light is directed toward the intended area.
- Use the pivoting light bar to aim illumination toward the wall face, tread, counter edge or walking surface.
- Route the attached 10-foot lead wire through or behind the structure without pinching, sharply bending or exposing it to abrasion.
- Use outdoor-rated low-voltage connectors appropriate for the project and installation environment.
- Confirm transformer capacity, cable length and voltage drop for the complete lighting layout.
- Keep electrical connections accessible when practical for future inspection or service.
- Review the product gallery’s dimensional reference graphics before preparing the mounting area.
- Follow applicable electrical and building requirements.
What Is Included
- One Total Light TL-HS100-AZ hardscape ledge-light fixture
- Integrated four-diode LED light source
- Attached 10-foot lead wire
What Is Not Included
- Low-voltage transformer
- Main landscape-lighting cable
- Wire connectors
- Project-specific mounting or masonry materials
Product Resources
The product gallery includes dimensional reference graphics, fixture views and an installed application image for planning the fixture position and surrounding hardscape work.
Frequently Asked Questions
Does the TL-HS100-AZ require a separate LED lamp?
No. The fixture includes an integrated LED light source with four diodes.
What color light does this fixture produce?
It produces 2700K warm-white light with a rated output of 100 lumens.
Can the direction of the light be adjusted?
Yes. The light bar pivots so the installer can direct illumination toward the intended hardscape surface while keeping the source shielded from direct view.
What else is needed to operate the fixture?
A compatible 12V low-voltage transformer, main landscape-lighting cable and outdoor-rated wire connectors are required as part of the completed system.
Why Choose Total Light?
The TL-HS100-AZ combines low 1.5-watt power consumption, warm 2700K output, a pivoting shielded light bar and a long 10-foot lead wire in one hardscape fixture. Its focused design helps installers add discreet illumination to masonry, paver and outdoor-living projects without relying on a separate lamp.