FloFX Traditional Round Bond Flange Kit — Drops Straight Into Your Foam Tray

Preformed foam shower trays made curbless showers fast — but the drain that drops into them still has to bond to your waterproofing and hold a grate dead flush. The FloFX Traditional Round Bond Flange Kit is built for exactly that. It's the round sibling to the Universal kit, engineered as a direct drop-in for the foam trays you already use, so integration is seamless and the guesswork disappears.

It's a direct fit for Schluter, Prova, and Profilitec foam trays (and works in Laticrete trays with an LFT mortar to fill the 3/8" gap under the flange), and it ties straight into a standard 2" waste pipe. Like every FloFX flange, the underside is a honeycomb of mortar cavities that embed into the base and bond like an uncoupling membrane, and the face is the same woven, anti-wicking Seal Cell fabric that grabs any surface-applied waterproofing — sheet or liquid — with the printed surface showing your coverage as you go.

Where it differs from the square kit is the grate adjustment. Instead of the carrier-and-shim set, the Traditional kit uses FloFX's FlushFIT™ Adjustment Ring — a thick ring that sits flush with the flange to give tile a level plane and stop mosaics from dipping around the grate — paired with a Friction Free™ grate riser to set the height. Countersunk screw holes and a locking system keep the flange seated, and weep channels under the ring keep it draining for the long haul. It works with any standard FloFX grate. Building on a mud or custom pan instead of a foam tray? The Universal Bond Flange Drain Kit is the one you want.

Why Tile Pros Choose It

• Direct foam-tray fit: Schluter, Prova, and Profilitec trays, no guesswork
• 2" waste pipe: Connects directly, ready to go
• Bonds like uncoupling: Honeycomb mortar cavities lock into the base
• Any waterproofing: Anti-wicking Seal Cell flange grips all surface-applied membranes
• No mosaic sag: FlushFIT™ ring gives tile a level plane around the grate
• Built to last: Locking flange, countersunk screws, and weep channels
• Certified and guaranteed: ICC-ES PMG-1680 / UPC, Made in USA, lifetime warranty
• The easy button for foam-tray drains: It just drops in and behaves

Pro tip: Confirm your tray brand up front — it's a direct fit for Schluter, Prova, and Profilitec, and for a Laticrete tray, use an LFT mortar to get full coverage across the 3/8" gap under the flange. Set the FlushFIT™ ring flush with your tile plane so mosaics sit level right up to the grate.