Centurion HydroBond is a thixotropic 1K/2K urethane/acrylic topcoat designed for easy application, and excellent durability.
Hydrobond is suitable for use as a 1K and can be catalyzed at 5% by weight or volume with CW-4002 hardener for added mar and chemical resistance. Hydrobond has excellent coverage and vertical hang in all colors.
10 sheen (flat) is the most popular sheen and it is what we recommend for most applications.
Flat - 10 sheen (is a low sheen satin)
Satin - 30 sheen (high sheen satin)
Features:
- Excellent scratch and mar resistance
- 3 - 3.5 hour pot life with 5% by weight/volume CW-4002 hardener
- Great coverage in all colors
- Outstanding chemical and moisture resistance
- Apply at 5-6 mils
- Great coverage in all colors
- Excellent vertical hang
- Can be brush/rolled with great coverage -- even in off whites
All colors tint with Centurion's recommended industrial colorants for the best possible performance and coverage. Custom colors are always accurately matched to a 0.5 Delta E or less.
If you are ordering a color for the same job, you must include the HM number on the top of the can when ordering.
Paint manufacturer color swatches vary. Ensure the color is accurate before proceeding with a full scale application.
Airless: Apply with a 408 or 308 fine finish spray tip at 1600-2100 psi. This product is thick, but reduction should not be needed. If you are adding catalyst, you may reduce with 3-5% warm water or 9008 medium retarder reducer as needed.
HVLP Turbine: A minimum 5 stage HVLP turbine is recommended. Use a 1.8, or 2.0 needle. If needed, start with 3-5% of 9008 reducer and add up to 10%. A pressure pot with a 5 or 6 stage HVLP turbine will allow you to spray HydroBond without reducing.
Air Assisted Airless: Sagola 09/40 or 09/60
Brush/Roll: Wooster Microplush - apply with roller, and tip off with a soft brush. CW-9001 retarder may be required if you have low humidity or if if it's drying too fast.
This product must be applied in an environment where surface, product, and ambient temperatures are above 54F.
Lower temperatures will dramatically increase the viscosity of this product.
Recommended Primers:
New wood: 1108 (1K) or 1111 (1K or 2K)
Refinish: 1111 (2K with 5% catalyst) or 1123 (1K) or 1107 (2K with 10% catalyst - where extreme moisture resistance and adhesion is needed.)
Clear: 2001 sanding sealer
If your job requires multiple gallons, box/mix together like colors to ensure color consistency. It is also highly recommended to order enough for your job!
For a custom color select the sheen, choose the color brand, and then input the color name and/or color number.
Note: If you select a custom color, your order may not ship the same day. Custom color ship dates are posted at the top of every page Monday - Friday.