Say goodbye to runoff headaches. This is the auto-drain side on its own: automated waste water removal, so you stop tipping saucers, wet-vac'ing floors, and mopping up after every feed.
Note: this kit does not include fabric pots.
Who is this for?
Letting roots sit in runoff cuts oxygen at the root zone, weakens root health, and raises disease risk. This kit clears the waste water immediately after each feed, whatever you are feeding with, so the root zone stays clean and oxygenated. No sponging, no syringes, no wet vac, no tipping trays by hand.
Choose Your Setup
| Option | Choices |
|---|---|
| Stand Size | Small (37.5cm x 37.5cm x 11cm, up to 15 to 20L pots) or Large (52cm x 52cm x 12cm, up to 45L pots) |
| Fitting | Standard 16mm (1000L/hr pump) or Pro 25mm (3000L/hr pump) |
| Plant Count | 4 to 48 plants, in steps of 4 |
The Kit Contains
- Control Unit, matched to your fitting choice: Standard 16mm (1000L/hr pump) or Pro 25mm (3000L/hr pump)
- 16mm or 25mm fittings and pipe
- Stands in your chosen size
No drippers, filter, FlexiTank, or pump kit, this is drainage only. Feed by hand, or add irrigation using one of the options below.
Add a Feed System
Two ways to add irrigation on top of this drainage kit, depending on how much control you want:
| Route | Best for | Link |
|---|---|---|
| Top Spin Dripper Kits | A fixed kit sized to your plant count, ready to fit, no design work | High Pressure or Low Pressure |
| FloraFlex Drip System Builder | An odd-shaped room or an unusual plant count, built to your exact layout | Open the Builder |
Looking for similar runoff and platform solutions? Check out RTA Platforms or FloraFlex Platforms.