This Framed Ghost Polymer Clay Cutter Set is available in two coordinating frame sizes: 4 cm and 5 cm, with three style options: Frame & Ghosts, Frame Only, or Ghosts Only.

PLEASE NOTE ABOUT SIZING: The size selection on this listing refers to the coordinating frame size, even when purchasing the Ghosts Only option. If you select 4 cm Frame, the coordinating ghosts measure approximately 2.2 cm. If you select 5 cm Frame, the coordinating ghosts measure approximately 2.7 cm.

Frame & Ghosts — 5 cutters
Includes the frame cutter, oval inner-frame cutter for cutting out the center, back cutter, and a pair of mirrored ghost cutters.

Frame Only — 3 cutters
Includes the frame cutter, oval inner-frame cutter, and back cutter.

Ghosts Only — 2 cutters
Includes a pair of mirrored ghost cutters.

Baking Suggestion: Because the frame is thin and delicate, it can be easy to stretch or distort the shape when lifting the raw, uncured clay from your work surface. For best results, cut the outer frame and remove the center with the inner frame cutter directly on a smooth, shiny ceramic tile. Leave the frame in place and bake it directly on the tile so it keeps its shape.

Once baked and cooled, remove the frame from the tile. Use Oven-Bake Adhesive to attach it to the back piece, add the ghost and any other elements, then bake the assembled piece again.

Don’t worry about baking twice! Polymer clay can be baked multiple times. As long as you use the correct temperature for your clay, additional baking cycles will not harm or burn it.

Drill Guides Included: The frame cutter features a built-in drill guide. After pressing the cutter into your clay slab, use the included pin tool to poke small pilot hole through the drill guide. These pin marks act as precise guides for drilling or poking holes, before or after baking, so you can assemble your designs with ease and accuracy.