The Sinewave Beacon 2 is an all one lighting and charging solution for Dynamo Hubs. The Beacon 2 is one of the brightest dynamo powered front lights on the market Ideal for bikepacking, touring, commuting, night riding and ultra endurance racing. With a powerful 750lb peak brightness and specifically designed beam pattern the Beacon 2 is powerful enough to ride technical trails in total darkness so you never worry about being caught out after dark again. Popular among the top ultra-endurance cyclists such as Lael wilcox, the Beacon 2 also integrates a usb charge into the back of the light so you can charge powerbanks, gps devices, phones etc... while you cycle enabling you to be completely self reliant in remote areas when touring, bikepacking or ultra racing.

Features:

Steady light output

Flicker-free light down to 3-4 MPH.

Integrated USB Charger

Charge your phone, GPS, or any other USB device directly from the Beacon; no need for a separate charger.

Flexible Power Options

An external, off-the-shelf USB battery pack can be connected to maintain bright, flicker-free light even when stopped or riding slowly. Any available dynamo power replaces battery power until reaching a speed when all power is provided by the dynamo and the battery is no longer used.

750 Lumens

Lots of light, suitable for any style of riding.

Symmetrical Beam Pattern

Ideal choice for off-road riding.

Superior brightness at low and medium speeds

Dynamo power is optimized at low-to-medium speeds, reaching 100 lumens at 5 MPH, 375 lumens at 8 MPH, 600 lumens at 10 MPH, and 750 lumens at 13 MPH.

Low Brightness Mode

A reduced brightness mode for situations where full brightness is not needed, and for easy power sharing between the light and charger.

Standlight

A supercapacitor, charged while riding, provides about 5 minutes of standlight when stopped. The standlight can be turned off with the toggle switch.

Blinking Mode

A blinking mode is available when using external battery power.

Color Options

We are able to mix-and-match different colors for the front, middle, and back of the Beacon. Pick a combination that matches your bike or represents your country or team. Contact us about custom colors.

Mounting Options

The 10mm mounting tab is compatible with mounting hardware from B&M, Supernova, Schmidt, etc.

Compact Design

L x W x H - 58 x 42 x 42mm
115g (includes 36" dynamo wire)

Taillight Output

A taillight output is available and is controlled by the headlight.
Taillight compatibility information can be found here.

Better Color Temperature

While still in the "cool white" range, the Beacon generates slightly warmer light than other LED headlights. This results in less glare, less strain on your eyes, and does a better job reproducing natural colors.

Weatherproof

Designed to be used in any conditions. Multiple seals protect against water ingress, electronics are potted in epoxy, and all connectors are gold plated and designed for resistance to the elements.

Made in the USA

All Sinewave products are made in the USA. The Beacon is the only commercially available dynamo light made in the USA.

Warranty

3 years

What's in the box?

The Beacon comes with a USB-to-DC cable.
A mount is not included - there are many options available for different mounting locations. Contact us if you need advice about mounting options.