Pre-Order. Shipping late November-early December 2026!
Confirm vehicle has 2” receiver hitch and 250 lbs. required tongue weight rating before purchasing.
Atlas PowerLift E-Bike Rack (EBR1) is a hitch-mounted, motorized rack that lowers to ground level so you can roll an e-bike into place instead of lifting it, then powers back up for transport. It solves the problem of loading heavy e-bikes onto a standard rack by hand — the system runs on its own self-contained battery, so no vehicle wiring is required.
The system requires a 2" receiver hitch rated for at least 250 lbs of tongue weight, and is built for SUVs, trucks, RVs, and mid-size unibody vehicles rather than a specific make or model. The rack detaches from the PowerLift unit for independent use when you're not hauling bikes.
Key Features: Atlas PowerLift EBR1 E-Bike Rack
Powered loading built around a single hitch-mounted unit:
- Fits 2” receiver hitch
- A minimum 250 lb tongue weight rating
- Works with campervans, SUVs, trucks, RVs, and many mid-size unibody vehicles.
- High-torque linear actuator lowers the rack to ground level for rolling a bike on, then lifts it back into transport position.
- Self-contained battery powers the lift independently of the vehicle — no wiring or electrical hookup needed.
- Fast-charge 120V port brings the battery from empty to full in about 3 hours.
- Integrated battery gauge and power button let you check charge and operate the lift without pulling out a phone or remote.
- Two wireless remote controls operate the lift from a distance.
- Anti-rock mounting design reduces sway and movement during transport.
- Built-in puddle lamp lights the ground around the rack when loading in the dark.
- Locking through-pin secures the rack to the hitch.
What's Included?
- PowerLift unit
- 2x EBR1 e-bike rack
- Universal mount
- 2x Wireless remote controls
- Locking through-pin
- Wrenches (5mm, 6mm, 8mm)
- Instructional materials
- Atlas keychain
Specifications: Atlas PowerLift EBR1 E-Bike Rack
| Max Load Capacity | 250 lbs |
| Lift Unit Weight | 46 lbs |
| Rack Weight | 90 lbs |
| Mount Weight | 8 lbs |
| Total System Weight | 144 lbs |
| Hitch Requirement | 2 in. receiver hitch, 250 lb minimum tongue weight rating |
| Charge Time | Approx. 3 hours, empty to full |
| Finish | Satin black |
| Warranty | 2 years (mechanical, structural, and manufacturing defects) |
FAQ's
How much weight can the system handle?
The Atlas system supports up to 250 lbs of combined load capacity.
What vehicles is it compatible with?
Compatible with vehicles equipped with:
- A 2” receiver hitch
- A minimum 250 lb tongue weight rating
Works with SUVs, trucks, RVs, and many mid-size unibody vehicles.
Do I need to lift the bikes at all?
No. The system lowers to ground level, allowing you to roll bikes into position.
How is the system powered?
Atlas uses a self-contained battery system, completely independent from your vehicle.
Do I need to connect it to my vehicle’s electrical system?
No. No wiring is required.
How long does the battery take to charge?
Approximately 3 hours from fully depleted to fully charged(120V port).
How do I check battery level?
The lift includes an integrated battery gauge.
What controls are included on the lift?
- On/off power button
- Battery gauge
- Charging port
- Built-in puddle lamp
Do I need to purchase anything separately?
No. Everything required is included.
Can I remove the rack?
Yes. The rack detaches and can be rolled independently.
Is it weather resistant?
Yes. The system is designed for outdoor use.