The Blueprint Robotics robot kit for Sphero Robotics Competition teams. It includes the Swerve Drive Robot, controller, battery, snap-together mechanical parts and electronics sets, and competition accessory parts for one team (only one kit is required, but a single team can use up to 2 robots in competition). Competition Field and Field & Game Elements sold separately.

GOOD TO KNOW

• • Sphero Robotics Competition is for 18 and under on Sept 1 (U19)
• • Supports 4–8 students per team
• • One team can run up to two robots
• • The Sphero Robotics Competition Kit is reusable year-to-year.
• • Learn how to participate and register your team at TEAMAlliance.org.
• • Recommended for ages 14 & up

Coming Soon...

Coming Soon...

The official competition field for the Sphero Robotics Competition (SRC). Interlocking floor and wall tiles create a regulation-size 3m×3m surface that schools, clubs, and Event Hosts can use for practices and competitions. The 26–27 SRC Field & Game Elements are sold separately.

GOOD TO KNOW

• • The same field used at approved TEAM Alliance SRC Qualifying and State Events
• • Sets up and breaks down for compact storage
• • Reusable from season to season
• • Built to official SRC competition dimensions
• • Pair with the 26–27 SRC Field & Game Elements

The official field elements for SRC Launch Party, the 2026–27 Sphero Robotics Competition game. Teams race to launch balls onto their opponent’s side of the field before time runs out. Pair with the SRC Field Tiles & Perimeter, sold separately.

GOOD TO KNOW

• • Includes balls, fence panels, competition walls, connectors, plates, corners, and mesh storage bags
• • Supports team-vs.-team matches with up to two robots per team
• • Use for practice matches, Technology Trials, official events, or your own competitions
• • Specific to the 2026–27 SRC Launch Party season
• • SRC Field Tiles & Perimeter sold separately

• 1 Blueprint Robotics Swerve Drive Robot
• 1 Rechargeable Battery
• 1 Controller
• Mechanical Parts Set (includes SRC competition accessory parts)
• Electronics Set (Magnetic Proximity Switch x2, Distance Sensor, Beam Break Sensor, High Speed Motor x3, High Torque Motor x2)
• Game Elements (1 Ball + 1 Cube)
• Charging Cable
• 3 Storage Bins

• 1 Blueprint Robotics Swerve Drive Robot
• 1 Rechargeable Battery
• 1 Controller
• Charging Cable

• 1 Blueprint Robotics Swerve Drive Robot
• 1 Rechargeable Battery
• 1 Controller
• Mechanical Parts Set
• Electronics Set (Magnetic Proximity Switch x2, Distance Sensor, Beam Break Sensor, High Speed Motor x2, High Torque Motor)
• Game Elements (1 Ball + 1 Cube)
• Charging Cable
• Resources, Robopedia, downloadable lessons & unit plans, and more!

• 100 Field tiles
• 60 Wall tiles
• 8 Field corners

• 5 Fence panels
• 30 2x1 Plates
• 60 Connectors
• 60 Balls
• 2 Mesh bags (for ball storage)
• 20 Competition walls
• 4 Field corners

Swerve Drive Robot: 12.8" (L) x 12.8" (W) x 4.9" (H)
Swerve Drive Robot Battery: 4.3" (L) x 4.3" (W) x 1.3" (H)
Controller: 6.1" (L) x 4.5" (W) x 1.5" (H)
Accessory Bins: 17.8" (L) x 12.9" (W) x 8" (H)

Swerve Drive Robot: 12.8" (L) x 12.8" (W) x 4.9" (H)
Swerve Drive Robot Battery: 4.3" (L) x 4.3" (W) x 1.3" (H)
Controller: 6.1" (L) x 4.5" (W) x 1.5" (H)

Swerve Drive Robot: 12.8" (L) x 12.8" (W) x 4.9" (H)
Swerve Drive Robot Battery: 4.3" (L) x 4.3" (W) x 1.3" (H)
Controller: 6.1" (L) x 4.5" (W) x 1.5" (H)
Accessory Bins: 17.8" (L) x 12.9" (W) x 8" (H)

Classroom Competition Field (assembled):
120" (L) x 120" (W) (305 cm x 305 cm)

Individual Competition Field Tiles:
11.8" (L) x 11.8" (W) (30 cm x 30 cm)