Air shipping is not available; please select ground or discount shipping at checkout.
Product Description
Epifanes Multiforte Black, 4000ml (MFB.4000) is a fast‑drying, tough satin coating designed for decks, gangways, work areas, and other high‑traffic surfaces above the waterline. Multiforte provides excellent adhesion, a hard‑wearing finish, and long‑lasting durability in demanding marine environments.
This coating is suitable for use on fiberglass (FRP), wood, steel, aluminum, and even concrete floors. Multiforte can be applied over any existing single‑component paint system—regardless of brand—and over Epifanes one‑component primers. It should not be overcoated with other one‑component paints; only Multiforte should be used for subsequent coats to avoid tension‑related failure.
Multiforte Black is ideal for commercial vessels, workboats, walkways, and any surface requiring a strong, abrasion‑resistant satin finish.
Packaged in 4L containers. Download technical data sheet here.
Features & Benefits
- Tough, hard satin finish for high‑traffic areas
- Fast drying with excellent adhesion
- Suitable for fiberglass, wood, steel, aluminum, and concrete
- Can be applied over any single‑component paint system
- Compatible with Epifanes one‑component primers
- Not to be overcoated with other one‑component paints
- Ideal for decks, gangways, and work areas above the waterline
Technical Information
| Type | Oxidative‑drying satin coating |
| Base | Urethane resin / alkyd resin / acrylate copolymer |
| Color | Black |
| Gloss | Satin |
| Density | 1.00–1.23 g/cm³ (depending on color) |
| Solids Content | 55 ± 2% (vol.) |
| VOC Level | 410 g/L |
| Packaging | 4000ml |
| Shelf Life | Approx. 3 years (41–86°F storage) |
| Recommended Film Thickness | 4 mil wet = 2 mil dry |
Drying Times
| 50°F | 59°F | 68°F | 77°F | |
|---|---|---|---|---|
| Dust‑Dry | 4 hours | 2 hours | 15 minutes | 10 minutes |
| Sandable / Recoatable | 20 hours | 10 hours | 6 hours | 4 hours |
Drying times are based on 65% relative humidity and 2 mil dry film thickness. Poor ventilation or thicker films will extend drying time. Do not apply wet‑on‑wet.
Application Conditions
- Temperature: 47–86°F
- Relative humidity: 50–85%
- Best applied by roller or spray
- Do not apply in direct sunlight or strong wind
- Surface temperature must be within 38°F of paint temperature
Surface Preparation
- Bare FRP: Clean with Epifanes Fiberglass Prep Cleaner; sand 220 grit; apply 1 primer coat
- Bare Wood: Clean and degrease; sand 220 grit; apply 1–2 primer coats
- Bare Steel: Remove corrosion; degrease; sand 60 grit; apply 3 primer coats
- Aluminum: Prime with Epifanes Washprimer AQ
- Existing Paint: Clean, degrease, and sand 220 grit
Coverage
Approx. 100 ft² per liter at 2 mil dry film thickness. Practical coverage varies with surface condition and application technique.
Recoating & System Build
- Apply 3 full‑bodied coats of Epifanes Multiforte
- Lightly sand between coats with 320 grit or Scotch‑Brite
- Do not overcoat Multiforte with other one‑component paints
SMSDistributors Expert Notes
- Extremely durable satin finish. Ideal for commercial and workboat applications.
- Fast drying. Great for tight schedules and multi‑coat systems.
- Excellent adhesion. Performs reliably on fiberglass, wood, steel, aluminum, and concrete.
- High‑traffic performance. Designed for decks, gangways, and work areas.
- Single‑component convenience. Easy to apply and maintain.
About SMSDistributors
SMSDistributors.com is an authorized dealer for Epifanes marine coatings, supplying the complete line of Epifanes varnishes, enamels, primers, additives, and specialty finishes. We maintain deep inventory for fast, reliable shipping.
We also offer custom tinting for Polyurethane, Mono‑urethane, and Yacht Enamel systems.
Our focus is on providing accurate technical data, manufacturer‑verified product information, and easy access to the full Epifanes catalog.
Category
Epifanes > Topcoats & Specialty Coatings > Multiforte