VoltX Indevolt PowerFlex 3000 AC Off-Peak Smart Power Station, Expandable 2kWh to 12kWh, 1000W-3000W LiFePO4 • Outbax

VoltX Indevolt PowerFlex 3000 smart power station, 2016Wh, 8000 cycle LiFePO4

All the Power, None of the Hassle

Introducing the VoltX Indevolt PowerFlex 3000, a plug-in power station for renters, homeowners, and more. It charges from a suitable wall socket and releases that electricity when electricity costs more. It’s a true power station without solar, with no panels or complicated switchboard upgrade required.

Because the VoltX PowerFlex is a power station for renters, too, it plugs in and moves with you. There’s no complicated install involved and nothing to leave behind. Charge it during free or off-peak hours, then run selected loads during more expensive periods or an outage.

Who It’s For

It’s a power station for apartment dwellers and unit owners on a standard AC connection who want lower bills without solar
Time-of-use customers with free, off-peak, or lower-rate windows who want to charge cheap and use it later
Fixed essential loads: garage freezers, second fridges, routers, NBN equipment, CCTV, and lighting
Small businesses running display fridges, POS, routers, and CCTV

VoltX Indevolt PowerFlex 3000 charging during the low-cost window for use later

Store Cheap Electricity Now, Use It Later

Charge when electricity is cheapest and use it during higher-rate hours. If your plan includes a free daily window, this 3-hours free electricity power station soaks up that cheap power and hands it back when rates climb.

In the app, you set a 95% depth of discharge (DoD) so a reserve stays ready for the next outage. You can also monitor charge, discharge, and status from your phone, making off-peak charging easier than ever.

VoltX Indevolt PowerFlex 3000 stacked modules expandable from 2kWh to 12kWh, shown in 8kWh configuration

A Power Station That Grows with You

Start with the 2kWh Power Module, then add compatible Battery Modules as your needs grow. On its own, the Power Module delivers 1000W; add one Battery Module and output rises to 2000W, and from two modules onward it reaches the full 3000W output. That makes it a genuinely expandable power station that you can right-size now and grow later.

One Power Module supports up to five add-ons, so capacity scales from 2kWh all the way to about 12kWh:

Power Module only: 1000W, 2kWh
Power Module + 1 Battery Module: 2000W, 4kWh
Power Module + 2 Battery Modules: 3000W, 6kWh
Power Module + 3 Battery Modules: 3000W, 8kWh
Power Module + 4 Battery Modules: 3000W, 10kWh
Power Module + 5 Battery Modules: 3000W, 12kWh

Battery Modules are sold separately.

VoltX Indevolt PowerFlex 3000 Power Module dimensions, 425mm wide by 195mm deep by 260mm high, six views

A Quick Space Check Before You Stack

Before adding Battery Modules, confirm the area can safely fit the complete stack, with room for ventilation and heat dissipation, including at least 30mm clearance behind the heatsink. Follow the user manual when stacking, securing, or removing modules, and always switch off and disconnect AC input before installing or removing a module.

Built to Keep Going for Years

It’s a LiFePO4 power station through and through. The VoltX PowerFlex uses lithium iron phosphate (LiFePO4) chemistry rated for up to 8000 cycles, with built-in intelligent BMS protection, and a 10-year Australian warranty.

VoltX Indevolt PowerFlex 3000 backed by a 10 year Australian warranty