The wayfinding finger post system provides an effective system for directional wayfinding. Used throughout the sign industry from simple footpath signs, traffic signage and retail the humble finger post is extremely useful. Our finger post hardware includes everything you need to fix a sign to a post and have it point in the direction required.

How to make a finger post sign

Step 1 - You will need

To create a finger post sign you will require a 3mm sign panel with your finished graphics. At the top and bottom of the sign board you will need a "T Rail" and "Offset T Bracket". 

Step 2 - Prepare the Rail & Bracket

You will need the T channel the same length as your sign board and then rivetted to the offset bracket. (We offer a riveting option if needed)

Step 3 - Bond your sign board

Once your bracket and T channel are fixed, you can then bond your sign panel into the T rail groove with a structural glue such as Stykra 1000 or you can fix with rivets.

Step 4 - Post fixing

Now you have your finger post sign, you can use a universal screw band or 76mm offset post clamp to attach it to the post. A universal screw band allow you to fix your finger post sign to a post between 45 - 217mnm in diameter.