Natural Shield is an exceptional waterproofing sealer that excels under the most demanding circumstances. Natural Shield’s low molecular weight allows for excellent penetration. Natural Shield fills into the pores of the substrate, in which chemical reaction follows, that creates a solid, but breathable membrane. Natural Shield provides long lasting protection for a vast array of surfaces in which it leaves a natural finish. It has durability and performance of a solvent-based system, but with the easy application and clean-up of water-based products. Natural Shield’s performance allows to be used in commercial areas to protect your surface and decrease maintenance efforts.

FEATURES / BENEFITS

Excellent penetration
Can be applied on damp surfaces
Highly alkaline resistant
Effective against freeze-thaw damage
Unaffected by ultra-violet rays
Increase life of mortar, tiles, stucco, brick and natural stone

SUBSTRATES

Existing
X-Bond System
Pre-Stain System
Stucco
Slump block
Block wall
Porous natural stone

TOOLS NEEDED

DRYING / RECOAT TIME

Drying times are affected by temperature and relative humidity. The chart represents guidelines values but each project is to be treated individually.

The chart represents the time needed in between coats at specified temperature.

Recoat Time

CURE TIME

Curing time is affected by temperature and humidity.

For example at only 50º F, a full cure would take 10 days in comparison to at 95º F it would only take 5 days to cure.

Cure Time

COVERAGE

sq ft / gallon, 3 coats

Polished Concrete	150 - 250
Artificial Stone	200 - 250
Stamped Concrete	200 - 300
Below Grade	150 - 200