The Canyon Outfitter 75 V2 is a 75-quart rotomolded hard cooler built for multi-day rafting, camping, hunting, fishing, overlanding, and family trips where both capacity and efficient packing matter.
Its straight-wall design makes better use of space in a raft, truck, trailer, or campsite, while pressure-injected foam insulation and an air-tight insulated seal are designed for extended ice retention. At 75 quarts, it provides substantial food and beverage storage without stepping all the way into expedition-size cooler territory.
The Outfitter 75 V2 provides 75 quarts of usable capacity. Canyon rates it for up to 62 12-ounce cans when packed for maximum ice retention or up to 88 cans at maximum capacity.
Canyon lists ice retention at approximately 5–8+ days depending on environmental conditions, packing, use, and how often the cooler is opened.
The squared-off profile helps reduce wasted exterior space when packing the cooler into vehicles, trailers, camps, or raft setups.
The hard shell is made from rotomolded kayak-grade plastic with pressure-injected foam insulation for demanding outdoor use.
A slotted lid and multiple tie-down points make it easier to secure the cooler with other gear in a boat, truck, or trailer.
The Outfitter 75 V2 is compatible with Canyon's model-specific side table/divider. The accessory can be installed vertically inside the cooler to separate provisions or mounted horizontally outside as a food-prep or work surface.
The Outfitter 75 V2 accepts up to two compatible Canyon wire baskets side-by-side, helping keep selected food and gear above the ice and meltwater. Baskets are sold separately.
Use accessories specifically sized for the Outfitter 75 V2. Current V2 accessories should not automatically be assumed to fit older Outfitter generations.
You need a large multi-day cooler for rafting, camping, hunting, fishing, road trips, or a group, but still want a relatively straightforward rectangular footprint for packing.
You usually travel solo, take day trips, or need a cooler that one person can move more easily when fully loaded. The Outfitter 22, 35, and 55 V2 offer progressively smaller footprints and capacities.
Your primary application is integrating a large cooler directly into a raft frame. Canyon's Prospector line is designed more specifically around expedition rafting and frame integration.
| Type | Rotomolded hard cooler |
|---|---|
| Best Use | Multi-day trips |
| Capacity | 75 qt |
| 12 oz. Can Capacity | 62 with maximum ice retention / 88 maximum capacity |
| Exterior Dimensions | 28.75" x 17.25" x 18.25" |
| Interior Dimensions | 23" x 13.5" x 15" |
| Weight | 30.5 lb |
| Material | Rotomolded kayak plastic |
| Insulation | Pressure-injected foam |
| Ice Retention | Approximately 5–8+ days depending on conditions and use |
| Side Table / Divider | Compatible; sold separately |
| Wire Baskets | Accepts up to 2 compatible baskets; sold separately |
It has a true 75-quart capacity. Canyon lists capacity at 62 12-ounce cans when packed for maximum ice retention or 88 cans at maximum capacity.
Canyon lists approximately 5–8+ days depending on environmental conditions and use. Actual performance varies with outside temperature, pre-chilling, ice ratio, contents, sun exposure, and how frequently the lid is opened.
Yes. The Outfitter 75 V2 can be used for rafting and includes multiple tie-down provisions. Measure your available frame or boat space before purchase if fit is critical.
No. The compatible side table/divider is an optional accessory sold separately.
Yes. On the Outfitter 75 V2, Canyon's compatible side table can also function as an internal vertical divider.
Yes. The Outfitter 75 V2 accepts up to two compatible Canyon baskets side-by-side. They are sold separately.
Canyon backs its qualifying hard coolers with its lifetime warranty. Coverage is subject to Canyon Coolers' current warranty terms, limitations, territory, and exclusions.