Description

100% UHMWPE performance at under 3 oz/yd². 

ULTRA™ TenX pushes Challenge Sailcloth’s ultralight backpack laminates even further, combining a 100% UHMWPE woven face with three-directional UHMWPE cross-ply reinforcement at under 3 oz/yd². A thicker 0.75 mil film improves durability for backpack applications while maintaining an exceptionally low overall weight.

• 100% UHMWPE Face: A high-strength UHMWPE woven face delivers exceptional abrasion and tear resistance at a fraction of the weight of traditional pack fabrics.
• 3-Direction Cross-Ply: ULTRA™ cross-ply fibers reinforce the laminate in multiple directions, increasing tear resistance and dimensional stability while limiting stretch.
• 0.75 Mil Recycled Poly Film: A waterproof inner film adds structure and durability while using 100% recycled polyester derived from post-consumer PET bottles.

An ideal choice for ultralight backpacks, daypacks, hip packs, stuff sacks, accessories, and other weight-critical applications where abrasion resistance, tear strength, stability, and waterproof construction matter.

ULTRA™ TenX is built for projects where every gram needs to be accounted for. High-strength UHMWPE, multidirectional reinforcement, and a more durable film come together in a laminate weighing less than 100 gsm.

Sold by the Half Yard. For example, enter a quantity of "4" to receive two linear yards of material, measuring two yards (72") in length by the listed width of the material (check specs tab).

Specs

(1) Actual material properties will vary. Values listed represent average values or estimates.

(2) Disclaimer - All information, data, recommendations, etc provided for Ripstop by the Roll products (the Information) is produced for reference only. Ripstop by the Roll assumes no liability arising from (i) the application, processing, or use made of the Information or products; (ii) infringement of the intellectual or industrial property rights of third parties by reason of the application, processing, or use of the Information or products by the Buyer. Buyer shall (i) assume such liability; and (ii) verify the information and the products.