Faster, calmer beaming for your Lojan Flex

The Lojan Raddle Flex spreads and secures your warp so you wind on at the right width and even tension from the very first turn of the beam. Designed specifically for the Lojan Flex Table Loom, it streamlines back-to-front warping, gives cleaner sheds, and helps your fabric weave to plan.

Spread warps to exact width—keep tension even

• Accurate width: dents guide ends so they wind on parallel—no crowding or hourglass at the back beam.
• Less tangle, fewer broken ends: organized spreading reduces crossings and abrasion as you beam.
• Locked in place: included plastic cover strips hold threads in the dents while you crank.
• Better weaving experience: more consistent tension shows up as smoother sheds and tidier selvedges.

Built to fit your loom

• Widths: choose 12" (30 cm) or 20" (50 cm) to match your Flex loom.
• Dent spacing: plan in the units you use—½" (imperial) or 1 cm (metric).
• Mounting options: position at the back beam for direct wind-on or above the shafts/castle to suit your workflow.
• Materials: durable beech & beech plywood with a natural finish—oil or wax if you’d like to match your loom.

Everything you need, included

• Lojan Raddle Flex (size & spacing as ordered)
• Plastic cover strips for securing the warp
• Mounting hardware and quick-start instructions

Set up in 30 seconds

1. Mount the raddle in your chosen position.
2. Spread warp ends into dents to your planned weaving width.
3. Snap on the cover strip so ends can’t hop out.
4. Wind on with steady tension (use paper/beam sticks as usual).
5. Remove the cover strip and continue threading/sleying.

Specs at a glance

• Compatibility: Lojan Flex Table Loom family
• Available widths: 12" (30 cm); 20" (50 cm)
• Dent spacing: ½" (imperial) or 1 cm (metric)
• Mounting: back-beam or castle position
• Construction: beech & beech plywood; natural finish