Bring polished metal back to a bright, show-ready finish—without setting up a full machine-polishing process.

Product details

• Restores clarity: Fine abrasives remove light haze, water spots, residue, and minor imperfections.
• Fast, controlled application: The sprayable formula is easy to work on polished wheels, fuel tanks, stainless trim, and diamond plate.
• Clean finish: Resists caking and hardening in textured areas such as diamond plate.
• Brightens and protects: Cleaning agents and sealants leave polished metal clean, glossy, and protected.

Is EZ Red right for the job?

Best for: light haze, water spots, minor imperfections, final-pass show prep, and maintaining previously polished metal.

Need more correction? For visible oxidation or mineral buildup, step up to Pro Red. For severe damage or maximum correction, use a buffing wheel and compound.

Choose your pack

• 24 oz: A convenient bottle for the shop, truck, or show-prep kit.
• 2-Pack: Save $5 compared with buying two single bottles.

1. Clean and dry the surface. Remove loose dirt and surface contaminants before polishing.
2. Shake well. Shake the bottle thoroughly before every use.
3. Apply to your applicator. Spray EZ Red onto a Premium Microfiber Round Pad or Premium Microfiber Towel.
4. Work the polish into the metal. Use linear motions that follow the surface's mill lines.
5. Let it haze. Allow approximately 30 seconds for a light haze to develop.
6. Wipe clean. Buff away the residue with a clean microfiber towel to reveal the finish.

Where EZ Red works best

• Polished aluminum wheels
• Polished fuel tanks
• Diamond plate
• Stainless-steel exterior trim
• Show vehicles and on-the-go touch-ups

Pro tip: After polishing, apply Hydro Guard Ceramic Spray or Graphene + Ceramic Spray Coating to help prolong the shine.

Trigger maintenance

Keep the spray trigger working properly by following our quick EZ Red and Q16 trigger-maintenance guide.

Safety data sheet

View the EZ Red Sprayable Metal Polish SDS.