Our own design of laser-cut 6mm thick stainless-steel suspension link arms, available in two length options to lower the seat height by either -20mm or -40mm (selected from the menu above).

Easy and quick to fit.

PLEASE NOTE. in extreme conditions, the -40mm version may cause the rear tyre to contact the underside of the rear fender at full compression - therefore this option is NOT recommended for heavy riders or those with a passenger or large luggage load.

NOTE: If fitting lowering links, add 10% to rider weights for 20mm link, and 15% for 40mm links, to compensate for changes in rising-rate geometry.