The Ultimate EMP Shield for Your Heavy-Duty Diesel Workhorse

When disaster strikes, you need a vehicle you can depend on to brave any terrain and handle heavy loads. Diesel trucks and vehicles provide the rugged power and efficiency that could mean the difference between survival or being stranded. But their critical electronics are just as vulnerable to being fried by an electromagnetic pulse (EMP) event.

Don't let an EMP from a solar flare, nuclear attack, or electromagnetic weapon take out your go-anywhere diesel vehicle. Fortify it with the Faraday Defense EMP Diesel Vehicle Protection Kit.

This comprehensive 3-part shielding system completely envelops your diesel truck, van, or other diesel vehicle in a protective Faraday cage to block out destructive EMP and electromagnetic radiation:

T.R.A.P.™ Transient Reducing Auxiliary Plug - Suppresses up to 5,000 watts of dangerous voltage spikes in <1 picosecond. Plug into auxiliary power outlets.
T.R.A.P.™-B Battery Terminal Suppressors - Two ruggedized modules connect directly to both diesel batteries to shunt away EMP energy before it fries electronics.
High-Saturation Auto Ferrites - Specialized ferrite cores install over battery wires to reduce current transients and electromagnetic interference.

With its automotive-grade weatherproof components, the Faraday Defense system stands up to the harshest environments. Simple tool-free installation gets your diesel truck or vehicle EMP-protected and survival-ready fast.

When the grid is down, you need a vehicle you can rely on. The Faraday Defense EMP Diesel Vehicle Protection Kit ensures your heavy-duty diesel rig keeps running through any electromagnetic threat. Beat the chaos and order your diesel truck EMP shield today!

Key Product Benefits:

Two T.R.A.P.-B suppressors protect both diesel batteries
T.R.A.P. transient suppression in auxiliary outlets
High-saturation ferrites reduce current transients
Ruggedized components for all-weather reliability
Simple tool-free installation for rapid deployment
Protects diesel trucks, vans, heavy equipment, etc.

Stop an EMP dead in its tracks and keep your heavy-duty diesel workhorse running strong with the Faraday Defense EMP Diesel Vehicle Protection Kit!

Frequently Asked Questions:

How can the T.R.A.P.™ be effective against an EMP when it's so small?

The danger to vehicles from an EMP is the high voltage that is introduced on the cables from E1 and E2. Those transient voltages are extremely brief in time (from nanoseconds to microseconds) and can therefore be suppressed using small devices. This is distinctly different than the case with homes, which would also experience a powerful E1 current surge from the power grid.

Can you use more than one T.R.A.P.™ in a vehicle?

Absolutely. Putting energy "traps" at multiple points in your vehicle helps to better shunt away the unwanted energy. Maximum protection is achieved by using a T.R.A.P.™ in every auxiliary power outlet, as well as using the T.R.A.P.™-B across the vehicle's battery.

Does a T.R.A.P.™ protect a vehicle when the vehicle is powered off?

The T.R.A.P.™ provides transient protection even with the ignition switch turned off because interconnected cable assemblies can still receive damaging energy. The T.R.A.P.™ continues to act as a high-frequency energy sink when the vehicle is unpowered.

Will a T.R.A.P.™ or T.R.A.P.™-B drain my battery?

T.R.A.P.™ products draw essentially zero current except when there is a significant overvoltage, so they will not drain your battery.

How long will they last?

The T.R.A.P.™ and T.R.A.P.™-B devices are designed to withstand any normal vehicle transient as well as a nuclear-generated EMP without damage.

Are these devices good quality?

The T.R.A.P.™ and T.R.A.P.™-B devices are hand assembled in the US and constructed from the highest quality materials (see below).

T.R.A.P.™ - The plug is made with bronze, nickel-plated negative contacts, gold-plated center contact, and Bakelite body. It is rated for 25 Amps continuous, much more than is needed for voltage transients. The transient voltage suppression component is ultra high reliability (AEC Q101 qualified), has a turn-on time of < 1 picosecond, and can suppress up to 5,000 Watts!
T.R.A.P.™-B – The weatherproof module is IP68 rated with integrated rubber o-rings, automotive-grade wire, copper terminals, and marine-grade heatshrink. It contains the same AEC Q101 qualified transient suppression device as the T.R.A.P.™ but in a more convenient form factor for use across the battery.

What are high-saturation ferrites?

Ferrites are devices that clamp around power wires to reduce high-frequency current transients. Most ferrites will saturate and stop providing protection when more than a couple of amps flow through the wires. The custom-made, high-saturation, auto ferrites sold here are modified to allow significantly more current through the part before saturating.