• Description
• Specs
• Safety
• Amazon

• Epoxy Resin and Hardener Refill. Pot Life, 45 min. Suited for medium to smaller sized laminates. Heat cured at 140 degrees F, 8 hours for sufficient cure. Non-heat cure, dependent on size and thickness of laminate, 24 hours for sufficient cure.
  
  

• Epoxy & Hardener Mix

  Mix Ratio:	Weight 3.5:1, Volume 3:1
  Pot Life:	150g @ 77 degrees F: 44-54min

  
  

  Epoxy Resin - 4 ounce bottle

  Color:	Clear
  Viscosity:	6890 cp
  Density:	1.16 gms/cc

  
  

  Hardener - 1.3 ounce bottle

  Color:	Amber
  Viscosity:	42 cp
  Density:	0.97 gms/cc

  
  

• Breathing in vapors may cause allergic reactions. Avoid contact with eyes and skin. Wear protective rubber clothing, gloves, and face shield to prevent contact with skin. In case of contact, immediately wash skin with water and soap.
  
  

• This Product is avalable on Amazon
  
  Select products are Fulfilled By Amazon and have Prime Availability while other Products are available on Amazon but are fulfilled by Predator Cycling, non-Prime Seller fulfilled. Shipping rates vary.
  
  

*This listing is for replacement or additional carbon fiber used in conjunction with the Predator DIY Carbon Repair Kit.