Insulator and Anchor in One — A Pre-Fastened Loop That Speeds the Termination

The Strainrite High Strain Quick Loop Insulated Strainer pairs a JouleShield™ high-strain end insulator with a pre-fastened looped cable, so the anchor point and the insulation arrive as one component. Wrap the loop around the post and the anchor is made — no knot to tie, which is what usually slows a high-tensile termination down.

The insulator is the part that matters. JouleShield's high-wall channels raise the insulator's overall resistance, cutting the voltage loss that end and corner strains are prone to, and the water-shedding shape limits leakage from rain, dew and contamination. It's built to take high strain without deforming or cracking, in long-life UV-stabilised fibreglass-reinforced polymer.

Suits end posts, corner posts where the wire changes direction, and gate anchor points on permanent electric fence.

Features

Pre-Fastened Quick Loop
Insulator and cable loop arrive as one component — no knots required to anchor it.

JouleShield™ High-Wall Channels
Increased resistance across the insulator, reducing voltage loss along the fence line.

Water-Shedding Design
Limits leakage caused by rain, dew and contamination.

Built for High Strain
Handles constant tension without deforming or cracking.

UV-Stabilised, Fibreglass-Reinforced Polymer
Long-life material for a termination that gets built once and left standing.

End, Corner and Gate Anchor Points
Wherever the wire is under constant tension or changes direction.

Specifications

• Brand: Strainrite
• Type: High-strain end insulator with pre-fastened quick loop
• Insulator: JouleShield™ high-wall channel
• Material: UV-stabilised, fibreglass-reinforced polymer
• Sold As: [CONFIRM FROM INVOICE — single unit or box of 25]
• Application: End posts, corner posts, gate anchor points
• Range: Permanent Wire Strainers — Insulators

Terminating the wire? Finish with crimp sleeves. Browse the full range at Fence Insulators, or see the Strainrite Hi-Test Insul-Strainer for in-line tensioning.

One component, one wrap — an insulated high-strain anchor without the knot.