What You Get
One 8 ounce bottle of SEK Surebond Oil Extractor, drawn from a factory sealed container and filled here at our New Jersey warehouse.
- 8 ounce sample bottle with a sealed cap, clearly labeled
- The same ready to use liquid as the quart, do not dilute it
- Enough for a test patch, typically around 6 to 15 square feet
Built for Old Oil, Not Fresh Drips
Most degreasers emulsify the surface layer of a stain and drive the rest deeper into the paver, which is why an oil patch often looks worse a month later. Oil Extractor dissolves, encapsulates and then removes the oil instead.
That difference matters most on old stains. SEK aims this at the oil that has been sitting under a parked car for two summers rather than the drip from yesterday. A sample tells you whether your stain is still recoverable, which is genuinely worth knowing before you buy a quart.
How to Use the Sample
- Pick the oldest, deepest oil stain you have
- Apply ready to use, do not dilute
- Let it dwell for the time on the SEK label
- Remove the residue as directed and rinse
- Let it dry fully, deep stains often lift in stages across several applications
What It Extracts
SEK rates coverage at roughly 25 to 60 square feet per quart depending on how heavy the staining is.
- Old motor oil soaked into pavers
- Transmission and hydraulic fluid
- Food and cooking oil on patios
- Grease around outdoor kitchens
Ready for the Full Size?
Once the sample confirms it does the job, the full SEK Surebond Oil Extractor, 1 quart is here. Browse every paver and stone cleaner we carry, or the rest of our sample bottles and color kits.