The Roller Alliance Specifies in Their Own Instructions
Most Alliance sealer data sheets say the same thing: spray it in 60 sq ft sections, then back-roll it (Resealer is rolled on, and the Natural Stone Color Enhancer uses a 1/4 to 3/8 in nap roller). Yellow for water based, grey for solvent based, and using the wrong one is how you get a ruined roller and a streaked patio.
|
Ships Same Day From our NJ warehouse |
9 in Rollers Yellow and grey |
|
Named in the TDS Required for back-rolling |
Real Humans (856) 418-4895 |
Why Contractors Ask for Gator Roller by Name
Spraying alone leaves puddles, and puddles dry as milky or blotchy patches. Back-rolling pulls the excess out and evens the film, which is why Alliance builds it into most of its sealer application steps.
- Yellow roller for water based sealers, the whole Hybrid Seal line and the Signature Series Natural Look.
- Grey roller for solvent based sealers: Gator Seal Wet Look, Satin Look and Resealer. Solvent dissolves a roller not built for it.
- Named in the application step of Alliance's sealer data sheets, not an optional accessory.
- 9 inch, the standard frame size.
Gator Roller Specifications
| Yellow | 9 in, for water based sealers |
| Grey | 9 in, for solvent based sealers |
| Used for | Back-rolling after spray application, in 60 sq ft sections |
| Water based sealers | Hybrid Seal High and Low Gloss, with or without color enhancer; Signature Series Natural Look |
| Solvent based sealers | Gator Seal Wet Look, Satin Look, Resealer |
Where Gator Roller Works
Use a Gator Roller for:
- Back-rolling Alliance paver sealers after spraying
- Evening out the film in 60 sq ft sections
- Pulling excess sealer out of low spots before it dries
Match the Roller to the Sealer
Do not use the yellow water-base roller with a solvent sealer. The solvent attacks the cover and you will roll fibres into the finish.
Alliance recommends two people on a sealer job: one spraying, one back-rolling behind.
Not sure if your project qualifies? Call us at (856) 418-4895 before you order. We will give you a straight answer, even if the answer is that this is not the right product for your job.
How to Back-Roll a Paver Sealer
The full step by step guide is in the official documentation below. Here is the shape of the job:
- Spray one 60 sq ft section at a time.
- Back-roll immediately with the correct roller, working the sealer even and lifting any puddles.
- Move to the next section and keep a wet edge so the sections blend.
- Do not go back over cured areas. One coat is what Alliance specifies.
Quick Answers
Why two different rollers?
Solvent based sealer dissolves a cover made for water based product. The grey roller is built to resist it.
Which one for a Hybrid sealer?
Yellow. Every Hybrid Seal is water based.
Which one for Gator Seal Wet Look?
Grey. The Gator Seal line is solvent based.
Do I really need to back-roll?
Alliance builds it into the application step of most of its sealer data sheets. Resealer is the exception: it is rolled on with a foam roller, no spraying. Skipping it is the usual cause of milky or blotchy patches from over-application.
What size?
9 inch, the standard frame size.
Official Alliance Gator Documentation
Download a Hybrid Seal TDS (PDF) →
Documents are published by Alliance Gator. They open in a new tab. Every sheet we carry is also listed in our TDS and SDS library.
Pairs Well With
- All paver sealers, what these rollers are for.
- Gator Sprayer, the other half of the spray-and-backroll method.
- Gator Efflorescence Cleaner, the required pre-seal clean.
Order before our daily cutoff and your Gator Roller ships today from New Jersey.
Questions about your project? Call (856) 418-4895 and you will get a real person who works with sealer application every day.