An 8 ounce non-woven erosion control fabric that goes under rip-rap, behind boulder walls and anywhere soil needs to stay put while water moves through. Tear resistant, easy to cut, and heavy enough to take rock placement without punching through.
|
Ships Same Day From our NJ warehouse |
4 Sizes Pick yours above |
8 oz per square yard non-w… Key spec |
Real Humans (856) 418-4895 |
Skipping fabric is invisible on install day and expensive later: drain rock silts shut, base disappears into mud, and the fix means digging it all up.
EC8 Heavy Duty Non-Woven Erosion Control Fabric is recommended by SRW Products for drainage and separation work:
Per SRW's certification letter, EC8 meets AASHTO M288 Survivability Class 1, with 205 lb grab tensile strength, 535 lb CBR puncture, 95 gpm/sq ft water flow and an AOS of #80, and it is made in the USA.
The full step by step guide is in the official TDS below. Here is the shape of the job:
Always test in a small discrete area first.
Woven or non-woven?
Non-woven for drainage and filtration: French drains, behind walls, around stone. Woven for strength under base and traffic. If water flow is the job, you are in the right place.
Which weight do I need?
The number is ounces per square yard. 4 to 4.5 oz covers residential drains and separation, 6 to 8 oz for rock placement, 10 oz and up for commercial abuse.
Will it clog?
Needle-punched non-wovens are made to pass water while holding soil. Sized correctly they run for decades, which is why drainfields specify them.
Is there anything I should know about handling it?
Wear gloves and eye protection, follow the label, and keep it away from children and pets until placed or cured. Full precautions are in the SDS below.
Documents are published by SRW Products. They open in a new tab. Every sheet we carry is also listed in our TDS and SDS library.
Order before our daily cutoff and your EC8 Heavy Duty Non-Woven Erosion Control Fabric ships today from New Jersey.
Questions about your project? Call (856) 418-4895 and you will get a real person who works with this gear every day.
All 4 sizes below ship from our warehouse in Williamstown, New Jersey. Pick yours from the drop-down above. Every one carries its own part number, so reordering the exact same item later is straightforward.
| Size | Part Number |
|---|---|
| 6 ft x 100 ft roll | FEC8 06100 |
| 6 ft x 300 ft roll | FEC8 06300 |
| 12.5 ft x 360 ft contractor roll | FCEC8 125360 |
| 15 ft x 300 ft contractor roll | FCEC8 15300 |