Small or large? Let's make sure you get the perfect fit. IKEA sells the ÅKERBÄR greenhouse in two widths, but the selection varies by country.
Which sizes does IKEA currently list in your country?
Denmark, Estonia, Germany, Italy, Latvia, Lithuania and Poland.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Finland, France, Greece, Hungary, Ireland, Luxembourg, the Netherlands, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Luxembourg is listed according to the IKEA Belgium catalogue. This guide reflects IKEA's online ranges in October 2026 and may change.
Already own an ÅKERBÄR? Measure the outside width of your greenhouse before ordering, especially if you bought it abroad or some time ago. Our 45 cm and 65 cm accessories are not interchangeable.
Turn your IKEA ÅKERBÄR into an organised miniature plant cabinet with a fitted tray and pegboard system designed specifically for the greenhouse.
The clear acrylic pegboard creates vertical space for plants and accessories, while the fitted PETG trays protect the greenhouse base and collect drainage beneath your pots.
Choose the Basic set for simple water collection or the Pro set for raised mesh trays, an additional acrylic shelf and humidity monitoring.
Every acrylic and PETG component is designed and manufactured in Czechia specifically for IKEA ÅKERBÄR.
These sets are designed exclusively for the two IKEA ÅKERBÄR greenhouse sizes:
Choose the Basic set when you want fitted open trays that collect drainage beneath pots.
Choose the Pro set when you want:
Basic and Pro trays have different constructions. Basic trays cannot be converted into Pro trays, and the mesh lids are not sold separately.
The pegboard accepts selected IKEA SKÅDIS accessories and PlantScraper pegboard attachments. Check that the selected accessory and plant fit comfortably inside the greenhouse without preventing the doors from closing.
The full-width shelf included with the Pro set is 7.5 cm deep. Choose pots whose bases fit completely on its supporting surface.
Install the pegboard and shelf
No drilling, cutting or permanent greenhouse modification is required.
Use the trays
With the Basic set, place pots directly inside the open trays. Empty excess water whenever the plants should not remain standing in it.
With the Pro set, place pots on the removable mesh lids so drainage can collect below. Water held beneath the lids may help increase humidity while keeping the pot bases raised above it. Always keep the water level below the pot bases.
Empty and clean the trays regularly. Maintain airflow around the plants and monitor conditions inside the greenhouse. Standing water does not replace appropriate ventilation.
Clean acrylic with water, mild soap and a soft cloth. Avoid abrasive cleaners, acetone, alcohol and alcohol-based products.
For indoor use only.
Basic set
Pro set
The hygrometer can stand inside the greenhouse or hang from the pegboard. Batteries are not included.
Dimensions
45 cm set:
65 cm set:
Materials
The selected white or black colour applies to the PETG trays, magnetic pegboard mounts and the hygrometer included with the Pro set. The acrylic pegboard, full-width shelf and shelf brackets remain clear in both colour options.
The greenhouse, plants, pots, lights, fans, additional shelves, plant holders and decorative pegboard accessories are sold separately.
IKEA, ÅKERBÄR and SKÅDIS are trademarks of their respective owner and are used only to indicate compatibility. PlantScraper is not affiliated with or endorsed by IKEA.