Small or large? Let's make sure you get the perfect fit. IKEA sells the ÅKERBÄR greenhouse in two widths, but the selection varies by country.

• Small ÅKERBÄR: 45 cm wide × 35 cm high.
• Large ÅKERBÄR: 65 cm wide × 40 cm high.

Which sizes does IKEA currently list in your country?

Both 45 cm and 65 cm

Denmark, Estonia, Germany, Italy, Latvia, Lithuania and Poland.

45 cm only in the current local catalogue

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Finland, France, Greece, Hungary, Ireland, Luxembourg, the Netherlands, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Luxembourg is listed according to the IKEA Belgium catalogue. This guide reflects IKEA's online ranges in October 2026 and may change.

Already own an ÅKERBÄR? Measure the outside width of your greenhouse before ordering, especially if you bought it abroad or some time ago. Our size-specific pegboards, full-width shelves and tray sets are not interchangeable between the 45 cm and 65 cm models.

Good to know: Our compact shelf and replacement shelf brackets are compatible with both greenhouse sizes when used with a suitable pegboard.

Build, expand or rearrange your IKEA ÅKERBÄR setup with individual pegboards, shelves, brackets and fitted tray systems designed specifically for the greenhouse.

Add vertical display space, introduce another level for smaller plants or protect the greenhouse base from drainage. Each component is sold separately, allowing you to choose only the parts your setup requires.

Every acrylic and PETG component is designed and manufactured in Czechia.

• Made for both ÅKERBÄR sizes: Select the 45 cm or 65 cm version where applicable.
• Modular system: Combine pegboards, shelves and trays according to your plants and available space.
• Magnetic installation: The pegboard mounts to the greenhouse's metal frame without drilling.
• Clear acrylic shelving: Adds planting space without visually closing the greenhouse.
• Fitted tray options: Choose direct water collection or raised mesh lids.
• Colour-matched components: Trays and magnetic mounts are available in white or black.
• Replaceable shelf brackets: Individual brackets are available if one becomes lost or damaged.

Choose the 45 cm or 65 cm option to match your IKEA ÅKERBÄR greenhouse where required.

Select the component that suits your setup:

• Magnetic pegboard: Creates vertical space for compatible shelves, plant holders and accessories.
• Full-width shelf: Extends across most of the pegboard width and supports several smaller pots on one level.
• Compact shelf: Displays one compact pot or another lightweight greenhouse accessory.
• Replacement shelf bracket: Replaces a lost or damaged bracket from either PlantScraper shelf type.
• Open tray set: Collects drainage beneath pots standing directly inside the trays.
• Mesh tray set: Raises pots above collected drainage using removable mesh lids.

Both shelf types require a compatible PlantScraper acrylic pegboard or IKEA SKÅDIS and include the required clear acrylic brackets.

The PlantScraper pegboard accepts selected IKEA SKÅDIS accessories and PlantScraper pegboard attachments. Check that the selected accessory and plant fit comfortably inside the greenhouse without preventing the doors from closing.

Choose pots whose bases fit fully on the shelves' 7.5 cm depth.

Install the pegboard and shelves

1. Check that you selected the correct greenhouse size and component.
2. Confirm the fit before removing the protective film.
3. Remove the protective film from both sides of every acrylic component. The film may make the acrylic appear cloudy, scratched or marked before removal.
4. Attach the pegboard to the greenhouse's metal frame using the included magnetic mounting system.
5. Hang the shelf from a compatible pegboard using the included clear acrylic brackets.
6. Reposition the shelf as your plants and layout change.
7. Check that the arrangement does not obstruct the greenhouse doors before adding plants.

No drilling, cutting or permanent greenhouse modification is required. Follow the supplied installation instructions.

Use the trays

With the open tray set, place pots directly inside the trays. Empty excess water whenever the plants should not remain standing in it.

With the mesh tray set, place pots on the removable lids so drainage can collect below. Water held beneath the lids may help increase humidity inside the greenhouse. Always keep the water level below the pot bases.

Open trays cannot accept mesh lids or be converted into mesh trays. The mesh lids are not sold separately.

Clean and maintain

Clean acrylic with water, mild soap and a soft cloth. Avoid abrasive cleaners, acetone, alcohol and alcohol-based products.

Empty and clean the trays regularly. Maintain airflow around the plants and monitor conditions inside the greenhouse. Standing water does not replace appropriate ventilation.

For indoor use only.

Each selected component or tray set is sold separately.

Magnetic pegboard

• 1 clear acrylic pegboard
• All required magnetic mounts in the selected colour

Dimensions:

• 45 cm greenhouse: 41 × 34 cm
• 65 cm greenhouse: 61.5 × 38.5 cm
• Thickness: 3 mm

Full-width shelf

• 1 full-width clear acrylic shelf
• The required clear acrylic mounting brackets

Dimensions:

• 45 cm greenhouse: 40 × 7.5 cm
• 65 cm greenhouse: 60 × 7.5 cm
• Thickness: 5 mm

A compatible pegboard is required and sold separately.

Compact shelf

• 1 compact clear acrylic shelf
• 2 clear acrylic mounting brackets

Dimensions:

• Width × depth: 8 × 7.5 cm
• Thickness: 5 mm

The same compact shelf fits both greenhouse sizes. A compatible pegboard is required and sold separately.

Replacement shelf bracket, 1 bracket

• 1 clear acrylic replacement bracket

The bracket is compatible with the PlantScraper full-width and compact shelves. Select the required quantity when ordering replacements.

Open tray set

• 45 cm greenhouse: 2 fitted open PETG trays
• 65 cm greenhouse: 3 fitted open PETG trays

Mesh tray set

• 45 cm greenhouse: 2 fitted PETG trays and 2 removable mesh lids
• 65 cm greenhouse: 3 fitted PETG trays and 3 removable mesh lids

The trays and mesh lids are made from durable PETG suitable for prolonged moisture exposure.

The selected white or black colour applies to open trays, mesh trays, mesh lids and magnetic pegboard mounts. Pegboards, shelves and shelf brackets are always clear acrylic. For options containing only clear acrylic, the colour selection does not change the supplied product.

The greenhouse, plants, pots, lights, fans, plant holders, hooks and decorative accessories are sold separately.

IKEA, ÅKERBÄR and SKÅDIS are trademarks of their respective owner and are used only to indicate compatibility. PlantScraper is not affiliated with or endorsed by IKEA.