The Little Jax Brick Wall
Exposed Brick Character, Straight Onto Drywall
An exposed brick wall gives a room that warm, loft style character, but real brick slips are heavy, messy and need a pro.
These 3D panels are molded with raised bricks and recessed mortar lines, so you get real depth and shadow on a flat wall. Each 11.8 inch panel interlocks with the next, so the brick pattern runs on without a break.
Check this first
How Much Do I Need?
Each panel is 11.8 x 11.8 inches and a pack of 10 covers 9.7 sq ft. Measure the width and height of your wall in inches, multiply them, divide by 144 for square feet, then add 10% for cuts.
| Area | Size | Packs of 10 |
|---|---|---|
| Kitchen backsplash | 10 ft x 18 in (15 sq ft) | 2 packs |
| Kitchen island front | 6 ft x 3 ft (18 sq ft) | 3 packs |
| Half wall or wainscot | 10 ft x 3 ft (30 sq ft) | 4 packs |
| Feature wall | 8 ft x 8 ft (64 sq ft) | 8 packs |
Choose 1, 2 or 3 packs above, or add more to your cart for a full feature wall.
Easy to install
Build a Brick Wall Without the Mortar
No mortar, no heavy lifting and no mess. Each panel is light enough to hold in one hand.
Before you start: the wall must be smooth, clean, dry and free of grease. Freshly painted walls need at least 3 to 4 weeks to fully cure first.
Where it works
The Right Spot for Peel and Stick
Best on smooth walls in living spaces, kitchens and anywhere you want texture and warmth.
Great for
- Living room and TV feature walls
- Kitchen backsplash away from the stove
- Kitchen island and bar fronts
- Hallways, half walls and entryways
- Bedroom headboard walls
Not suitable for
- Fireplace surrounds or near a wood stove
- Directly behind a gas hob or cooktop
- Textured, bumpy or damp walls
- Inside a shower
- Outdoor walls
Heat safety: this is a PVC and vinyl product, and it can warp or melt near high heat. Do not install it directly behind a gas hob or cooktop, around a fireplace or near any open flame. Behind the stove, keep ceramic tile, glass or stainless steel.
The details
Specifications
| Panel size | 11.8 x 11.8 in |
| Pack | 10 panels, 9.7 sq ft |
| Thickness | About 0.1 in, with raised 3D bricks |
| Material | Self-adhesive molded PVC |
| Moisture | Water resistant, wipe clean |
| Cutting | Cuts with a utility knife or scissors |
| Color | Red Brick |
Good to know
Frequently Asked Questions
How many packs do I need?
Multiply the width and height of your wall in inches and divide by 144 to get square feet. Add 10%, then divide by 9.7. A 10 ft x 3 ft half wall takes 4 packs.
Is it real brick?
No. It is a molded PVC panel with raised bricks and recessed mortar lines, which gives it real depth while staying light enough to stick straight onto the wall.
Can I use it around a fireplace?
No. Keep it away from fireplaces, wood stoves, gas hobs and any open flame. PVC can warp or melt with heat.
Can I paint it?
We do not recommend painting it. The finish is designed to be wiped clean and paint may not bond well to it.
Can I use it on a textured wall?
It needs a smooth wall. On textured or bumpy finishes the adhesive cannot grip properly and panels may lift.
Can I take it down later?
It is made to stay up. On painted drywall, taking it down can lift paint or the paper face of the wall, so plan for some touch-up work if you ever remove it.
Why should I buy all my packs at once?
Colors can vary slightly between production batches. Ordering everything together keeps the whole wall matching, and it is worth adding about 10% extra for cuts and edges.
Add Loft Style Character to Any Room
Choose your number of packs above.