Room to stretch out — and sink right in. The Omnitub Sheer 1400 is the longest tub in the Sheer range: a full 600 mm deep soak over a generous 1400 × 700 mm footprint. Lie back at full length, shoulders under, without surrendering a single millimetre of depth. The newest size in the collection — handmade to order in Somerset, England.

The long soak, without the sprawl

Most long baths buy their length by going shallow and wide. Sheer refuses the trade. Near-vertical walls — just a 25 mm taper over the entire 600 mm depth — hold the water high and close around you the whole way down the tub, so the extra length is all soak, not spillage. Slim on the floor, immense inside.

Behind the name — Sheer

The name says everything the tub does. Sheer depth — a full 600 mm of uncompromising, shoulder-deep immersion. Sheer sides — near-vertical walls that drop like a cliff face, holding the water around you instead of sloping it away. And sheer simplicity — clean, pure lines, hand-finished by craftspeople in Somerset. It took a real design breakthrough to hold this much soak on a 700 mm-wide footprint, and the Sheer name is our shorthand for it: maximum depth, nothing wasted.

How deep it really is

• 600 mm internal soaking depth — full-body, shoulder-deep immersion
• Near-vertical walls (25 mm taper) — the water sits around you, not under a slope
• Far more usable volume than a conventional sloped tub of the same footprint

Dimensions

• External footprint: 1400 × 700 mm
• Internal soaking depth: 600 mm
• Overall height (rim to underside, excluding feet): 625 mm
• Internal opening: 1275 mm long × 650 mm wide at the rim (near-vertical walls to a 1225 × 600 mm base)
• Flanges: 100 mm at the tap/waste end, 25 mm on the other three sides
• Waste: ∅52 mm (1½” BSP), 215 mm from the tap end
• Six self-levelling feet

Where it fits

At 1400 mm long and just 700 mm wide, the Sheer 1400 is the range’s full-length soak — room to lie back at your full length, shoulders under — on a footprint slim enough for the rooms a conventional deep bath won’t go: family bathrooms, ensuites, loft conversions, period homes and apartments. It sits against a single wall — undermounted, overmounted, inset, part-submerged or freestanding on its feet. With our insulation upgrade it is equally at home outdoors or as a cold plunge.

Built to last a lifetime

• Standard 7-layer Omnigel built-up system — rigid, warm to the touch, hand-polished, no flex
• Colour runs right through the Omnigel, so it can never chip or fade off the surface
• Insulation upgrade available (25–150 mm) for outdoor, commercial and cold-plunge use
• 30-year manufacturer warranty — built to outlast the room around it

Made in your colour

Choose White, any RAL colour or BS 4800, or your own paint-sample match — manufactured into the material, never sprayed on. Use the colour selector to preview your finish, or open it in the Drawing Room.

Delivery & ordering

Free UK Mainland Named Day Delivery on a day that suits you — England, Scotland and Wales. Northern Ireland and the UK islands are a flat £120 inc. VAT. International shipping to 220+ countries with live rates at checkout. Every tub is handmade to order in Somerset with 100% payment taken at order — we then build it and deliver to the day you choose.

Why Omnitub

Omnitub has hand-built deep soaking tubs in Somerset, England since 2005 — proudly British made, by people, not machines. Sheer is what happens when that craftsmanship meets cutting-edge design: we re-engineered the wall geometry from the ground up to hold near-vertical sides, so a tub this deep fits a room this size. Every one is hand-laid from our proprietary 7-layer Omnigel built-up system, finished by hand, and backed by a 30-year warranty.

Finish — Hand-Polished or Matte

Every Omnitub is hand-polished to a deep, reflective finish as standard — a step above a sprayed gloss, with the colour cast right through the Omnigel rather than painted on. Prefer a softer, contemporary look? Choose Matte: a separate hand-finishing process applied after the polished build, giving a fine, low-sheen surface with the colour still cast through the Omnigel. As an additional hand-finishing stage, Matte adds around 5 working days to your build and 25% to the price.

You choose your finish — Hand-Polished or Matte — inside the Drawing Room, alongside your colour, waste and size. Design yours in the Drawing Room →

Handmade in Britain. This tub is handmade in our Somerset workshop — made by people, not production lines. The mould is handmade in our own factory, the shell is hand-laid layer by layer in our Omnigel built-up system, and every tub is inspected and signed off by the maker before it leaves. Verified Made in Britain — never imported.