The IR AnchorSpike™ Kits include a set amount of specially designed barbed aluminum spikes and a super strong two part epoxy. The IR AnchorSpikes have a hollow structure with open barbs that allow the epoxy to flow deep into the soil and create a solid anchor rated for up to 1,000 pounds of uplift per spike. Once in place, each BallastRack frame is designed to clamp onto two AnchorSpikes when the carriage bolts at the ends are tightened, which allows for fast and easy leveling of the system.
*One AnchorSpike must be tested at the installation site to ensure it can withstand a minimum of 1,000 lbs of uplift.
*Professional installation is recommended with this mounting option.
*1" Conduit Pipe / EMT (NOT included) is required to link the frames together and can be sourced at any local hardware or electrical supply store in 10' lengths, which is enough to cover two panels.
Recommended Tools:
- SDS Hammer Drill & 30 Inch SDS-Max Speed-X Carbide Rotary Hammer Bit for Concrete Drilling
Pros
- Fast and easy install
- No heavy equipment required
- Easy leveling of the system
- Ideal for compacted soil types
- In most cases, building permits are not required according to the 2018/2024 International Building Code (IBC®) Chapter 1, Section [A] 105.2 (see Documentation)
Cons
- Not recommended for rocky soil or frost depths over 20"
- Not for use in silty sand or soft soil types
- Professional installation recommended
- One EarthScrew must be tested to at least 1,000 lbs of uplift at installation site
- More expensive and less convenient than EarthScrews
10 Pack Kit
- 10 AnchorSpikes
- A & B Epoxy
- Mixing Cup
- Stirring Stick
- Gloves
- Pouring Cups
- Funnel
- Premium Ratchet Wrench