Optional Remote for EGLO Aloha Ceiling Fans
This is an optional remote for our range of EGLO Aloha DC Ceiling Fans. It suits both models - with and without the LED light installed. The EGLO part number 206637.
This remote control 'transmitter' is available for customers who wish to use a handheld wireless remote in addition to the Wall Control. It can also be used as the sole method of controlling the Aloha fans. It comes with a wall cradle and uses two AAA batteries.
How to pair an EGLO ceiling fan remote control and receiver
To add the remote control or re-sync an existing one, follow these steps:
Single Fan Installation
- Switch the power supply on at the wall or isolation switch. The receiver inside the ceiling fan will beep.
- Within 30 seconds, press and hold the FAN OFF button for 10 seconds or until it beeps (pairing has been successful).
Multiple Fan Installation
Important: Each fan and remote must be paired with all other fans switched off at their isolation switches or disconnected from power.
- Complete steps 1 and 2 above for the first fan.
- Switch off the first fan at the wall or isolation switch.
- Move on to the second fan and repeat the above process until all fans have been paired individually.
For full details, see the Installation Guide (PDF).
What should I do if the remote and receiver do not sync?
If the remote control does not pair on your first attempt, switch the fan off at its isolation switch. Leave it disconnected for at least 60 seconds before trying again.
What other fan models can this remote transmitter control?
This EGLO remote (part number 206637) can control the following EGLO fans:
- ALOHA Ceiling Fan (& light kit)
- ARUBA Ceiling Fan (& light kit)
- CURRUMBIN Ceiling Fan (& light kit)
- KURRAWA Ceiling Fan with Light
- NOOSA Ceiling Fan with Light
- SEACLIFF Ceiling Fan with Light
- SURF Ceiling Fan with Light
What other remote controls do you sell?
See our EGLO ceiling fan parts and accessories for several other in-stock remote controls.