Thermal Insulation for Exterior Building Surfaces
Thermal Insulation Exterior Coating is designed for residential, commercial, and industrial buildings seeking improved thermal comfort and energy efficiency.
Applied to exterior building surfaces, this functional coating helps reduce heat transfer and supports a more comfortable indoor environment. It provides a practical solution for buildings where improved thermal performance is desired.
Manufactured in Japan by Aqua Kasei Co., Ltd.
Features
- Thermal insulation coating
- Designed for exterior applications
- Helps improve thermal comfort
- Supports improved energy efficiency
- Suitable for residential, commercial, and industrial buildings
Specifications
Product: Thermal Insulation Exterior Coating
Available Sizes: 1 Gallon / 5 Gallons
Color: White (Munsell N 9.5)
Recommended Coats: 2 or more
Application Method: Brush, roller, or approved spray equipment
Recoat Time: Approx. 2 hours at 68°F (20°C)
Minimum Application Temperature: 41°F (5°C)
Maximum Relative Humidity: 85%
Recommended Environments: Residential, commercial, and industrial buildings
Manufactured in Japan by Aqua Kasei Co., Ltd.
Care & Application Guide
- Apply to a clean, dry surface free from dust, grease, oil, loose paint, rust, mold, and other contaminants.
- Apply a suitable primer when required for the substrate.
- Stir thoroughly before use. Do not over-mix.
- Apply by brush, roller, or approved spray equipment.
- Apply two or more coats.
- Allow approximately 2 hours between coats at 68°F (20°C).
- At approximately 50°F (10°C), allow at least 4 hours before recoating.
- Do not apply below 41°F (5°C) or when relative humidity exceeds 85%.
- Provide adequate ventilation during application and drying.
- Clean tools with water before the coating dries.
- Store tightly closed in a cool, dry, well-ventilated place at 41–95°F (5–35°C). Protect from freezing, direct sunlight, and excessive heat.