Balanced Protection and Thermal Comfort for Everyday Interior Spaces
Multifunctional Interior Coating Ultra Plus is a high-performance water-based interior coating combining antibacterial, anti-mold, and thermal properties.
Created for a wide range of interior environments, Ultra Plus is suitable for residential, healthcare, hospitality, education, office, and general commercial spaces. Its multifunctional performance makes it a practical choice for projects where maintaining a cleaner interior environment and improving thermal comfort are important considerations.
Ultra is designed to deliver a balance of performance and cost-effectiveness, making it well-suited for both residential and professional applications.
Features:
- Enhanced-performance interior coating
- Antibacterial and Anti-mold performance
- Supports improved thermal comfort
- Designed for areas with higher thermal stress
- Suitable for environments with condensation risk
- Designed for spaces with continuous temperature fluctuations
Specifications:
Product: Multifunctional Interior Coating Ultra Plus
Available Sizes: 1 Gallon / 5 Gallons
Color: White (Munsell N 9.5)
Recommended Coats: 2 or more
Application Method: Brush, roller, or approved spray equipment
Recoat Time: Approx. 2 hours at 68°F (20°C)
At 50°F (10°C): Allow at least 4 hours before recoating
Minimum Application Temperature: 41°F (5°C)
Maximum Relative Humidity: 85%
Recommended Environments: Residential and commercial interiors
Manufactured in Japan by Aqua Kasei Co., Ltd.
Care & Application Guide
- Apply to a clean, dry surface free from dust, grease, oil, loose paint, rust, mold, and other contaminants.
- Apply a suitable primer when required for the substrate.
- Stir thoroughly before use. Do not over-mix.
- Apply by brush, roller, or approved spray equipment.
- Apply two or more coats.
- Allow approximately 2 hours between coats at 68°F (20°C).
- At approximately 50°F (10°C), allow at least 4 hours before recoating.
- Do not apply below 41°F (5°C) or when relative humidity exceeds 85%.
- Provide adequate ventilation during application and drying.
- Clean tools and equipment with water before the coating dries.
- Store tightly closed in a cool, dry, well-ventilated place at 41–95°F (5–35°C). Protect from freezing, direct sunlight, and excessive heat.