DT100 Commercial Grade Robotic Cleaning for Large and High Traffic Pools
The Water TechniX DT100 is a heavy duty corded robotic pool cleaner engineered for large residential and commercial pools. Powered by a continuous AC supply and dual turbine centrifugal pumps, it pushes a massive 604.8 L/min (36,288 LPH) of water flow to power through any debris in a single run. With a 30m anti tangle cable, HydroCurve smart navigation, a 6.7L filter basket and full floor, wall and waterline cleaning, the DT100 delivers a deep clean across pools up to 520m², every inch, every time travelling at 15m per minute. Built on more than 10 years of deep sea robotics expertise and controlled via app, it delivers the confidence for every guest clean that hotels, gyms, clubs and public pools demand. Pre order now for delivery in approximately 30 working days.
What makes the DT100 good at cleaning?
The DT100 runs two turbine centrifugal pumps and two active brushes for relentless, continuous suction at 608.4 L/min. Its HydroCurve bow pattern navigation maps an efficient path for 95%+ coverage every session, scrubbing floors, climbing walls and reaching the waterline for a professional standard clean in one pass.
- NOTE : Designed for large and commercial pools. Working depth 0.8 to 5m.
How big a pool can it clean?
The DT100 is built for scale, cleaning in ground and above ground pools up to 520m². Its 30m (98 ft) cable gives full coverage of the floor, walls and waterline without repeated repositioning, and the anti tangle 360° swivel keeps the cable rotating freely so cleaning runs smoothly with less manual intervention.
How long does it run?
Because it is powered by a continuous AC supply, there is no battery to recharge and no drop in performance during extended cleaning sessions. Run it back to back through high traffic days and it just keeps going.
Can it clean all pool surfaces?
Absolutely. Whether your pool is concrete, fibreglass, vinyl or tiled, the DT100's dual active brushes and powerful pumps grip, scrub and lift debris from every surface.
How do I control it?
One touch auto modes are built in for hands off cleaning, but the smart app gives you full control, including scheduled starts, manual driving, spot cleaning, cloud services, water temperature display, and multi device and multi venue monitoring from a single dashboard.
What cleaning modes does it have?
It offers:
- Auto Mode: Full clean of floor, walls and waterline
- Spot Mode: Targeted cleaning of a specific problem area
- Manual Mode: Drive it yourself to any spot via the app
Is it easy to empty and maintain?
Yes. The large 6.7L filter basket with dual layer, dual zone filtration (180μm + 1μm) captures everything from leaves to ultra fine particles, meaning fewer stops, sustained operation and less emptying across a full pool.
Is setup complicated?
No, it is ready to use out of the box with one touch start. Optional on site installation and training is available for commercial venues.
What if I forget to take it out of the pool?
The DT100 features one touch parking, bringing the unit neatly to the pool edge for easy retrieval when cleaning is done.
Is it durable for the long haul?
Definitely. The DT100 is built on more than 10 years of deep sea robotics engineering with a marine grade motor system, and it is backed by a 2 year warranty. 2 year warranty on main body, PCBA, drive motor and pump motor. 12 months on consumable parts including filter basket, track and roller brush.
Key Features
- Continuous AC power supply for uninterrupted, commercial grade cleaning with no performance drop
- Dual turbine centrifugal pumps delivering 604.8 L/min (36,288 LPH) water flow
- Cleans pool floor, walls and waterline without repeated repositioning
- 30m (98 ft) cable with anti tangle swivel 360° cable rotation
- HydroCurve smart bow pattern navigation for 95%+ coverage every session
- Large 6.7L filter basket with dual layer, dual zone filtration (180μm + 1μm)
- Manual, Spot and Auto cleaning modes with smart app control
- Cloud services, scheduled start and water temperature display
- Multi device and multi venue monitoring from a single app dashboard
- Compatible with concrete, fibreglass, vinyl and tile, for pools up to 600m²
- Two active brushes for deep scrubbing on all surfaces
- One touch start and one touch parking at the pool edge for easy retrieval
- 2 year warranty on main body, PCBA, drive motor and pump motor, 12 months on consumable parts including filter basket, track and roller brush.
Cleaning Modes
- Auto Mode: Cleans the floor, walls and waterline
- Spot Mode: Targeted cleaning of a specific area
- Manual Mode: Drive the cleaner yourself via the app
Built For
- Luxury hotels and resorts
- Standard competition venues
- Fitness clubs and gyms
- Public and community pools
- Spa and wellness centres
- Large residential pools
Recommended maintenance : To keep your DT100 robotic pool cleaner running smoothly, we recommend regular maintenance of the spindle bearing and wheel bearings. These are located underneath the top cover at the end of the spindle and within each wheel. Simply remove the top cover and apply a light spray of a protective lubricant such as Inox, WD40 or CRC directly onto each bearing. This simple step helps prevent corrosion and ensures optimal performance. Following each cycle, empty debris from the basket, hose the basket and cleaner entirely, then store until next use is required.
Warranty : 2 year warranty on main body, PCBA, drive motor and pump motor. 12 months on consumable parts including filter basket, track and roller brush.
Consumables such as tracks and wearing parts are to be purchased and replaced as required.
Upgrade to the Water TechniX DT100 Corded Robotic Pool Cleaner for effortless, commercial grade pool maintenance powered by professional deep sea robotics technology.
Technical Specifications
| Specification | Details |
|---|---|
| Pool type | In ground and above ground |
| Pool size | Large pools up to 520m² |
| Working depth | 0.8 to 5 m (2.6 to 16.4 ft) |
| Pool surface | Concrete / Vinyl / Fibreglass / Tile |
| Cleaning coverage | Floor, walls and waterline |
| Coverage rate | 95%+ |
| Cleaning modes | Manual / Spot / Auto |
| Water flow rate | 604.8 L/min (36,288 LPH) |
| Filtration system | Dual layer |
| Filter precision | 180 μm + 1 μm (dual zone filtration) |
| Filter capacity | 6.7 L (1.77 gal) |
| Obstacle crossing height | 32 mm (1.26 in) |
| Navigation technology | HydroCurve smart bow pattern |
| App control | Yes |
| Cloud services | Yes |
| Scheduled start | Yes |
| Water temperature display | Yes |
| Moving speed | 15 m/min (49.2 ft/min) |
| Power source | AC power (corded) |
| Operation time | Continuous |
| Cable length | 30 m (98 ft) |
| Cable management | Anti tangle swivel 360° cable rotation |
| Easy retrieval | One touch parking at the pool edge |
| Robot dimensions | 485 x 475 x 342 mm (19.1 x 18.7 x 13.5 in) |
| Robot weight | 12.5 kg (27.6 lb) |
| Control box dimensions | 352 x 82 x 211 mm (13.9 x 3.2 x 8.3 in) |
| Control box weight | 2.3 kg (5.1 lb) |
| Motor system | 2 active brushes + 2 turbine centrifugal pumps |
What's in the box
- Robot (including buoyancy) x 1
- Control box (including power line) x 1
- Front strainer (1F) x 1
- Left strainer (3L) x 1
- Right strainer (4R) x 1
- Screw x 3
- File envelope x 1
The Hydro Robots are a strategic partnership with robotics company Chasing. The units delivered will be Chasing branded until our Water TechniX stock arrives. Same great product, just different packaging! Hang in there with us!