When trail breaks require more than luck, the Wide Open Throttle (WOT) Tool Kit delivers a curated, lightweight setup built for real snowmobile repairs in the backcountry. Every tool was chosen to handle nearly every fastener on modern sleds, without carrying extra ballast.

Why We Built It:

• Purpose-built for snowmobiles: We analyzed fastener patterns across Arctic Cat, Lynx, Polaris, Ski-Doo, and Yamaha, then eliminated tools that rarely get used. The WOT kit is optimized for what actually breaks on sleds.
• Weight & packability matter: On a sled or in a tight compartment, every gram counts. We cut weight by removing redundancies and using ultralight wrenches and compact sockets.
• Smart layout & access: Housed in a compact EVA case with an organizer roll, tools stay locked in place, won’t rattle, and are easy to grab during a breakdown.

Testing & Real-Use Scenarios:

• Deployed on remote snowmobile rides to fix loose bolts, reattach panels, and adjust suspension mid-ride.
• Carried through deep snow, vibration, and wet conditions to ensure tools remain usable and the kit survives abuse.
• Bench-tested by removing cargo-accessible fasteners and assemblies across multiple sled models to validate coverage and tool fit.
• Tested side-by-side with the Backcountry Tool Kit to compare coverage versus weight. The WOT kit is lighter, making it more likely to be carried. Total weight: 1260 g.

When You’ll Get Full Value:

• In the field on a sled trip: When you’re hours from service, this is the kit that keeps you moving.
• When weight and space are limited: Designed to strap to your sled or fit into tight storage.
• When simplicity is mission-critical: No fluff, no duplicates, only what works.
• When other tools fail you: Built to tackle common sled breakdowns without needing a full workshop.

Contents:

• Compact EVA case with organizer roll
• Ultralight wrenches
  • 8–10 mm
  • 10–12 mm
  • 12–13 mm
  • 14–15 mm
  • 16–17 mm
  • 17–19 mm
• Mini 1/4” drive ratchet
• 1/4” drive T-handle
• 4” 1/4” drive extension
• Sockets
  • 8 mm
  • 10 mm
  • 13 mm deep
  • 15 mm
• Bit driver adapter
• Bits
  • Torx
    • T10, T15, T20, T25, T30, T40
  • Hex
    • H4, H5, H6, H8, H10
  • Standard
    • PH2, SL6
• Other tools
  • 6.5” long-nose locking pliers
  • Mechanic’s wire
  • Electrical tape
  • Zip ties