• Dimmable LED driver with phase dimming
• Compatible with forward phase and reverse phase dimmers
• Label lists compatibility with ELV, MLV, and Triac dimmers
• Constant voltage design
• Converts110–277V AC input to12V DC output
• Delivers up to16.6A
• Supports up to200W max
• Suitable for dry, damp, and wet locations
• Marked Class P,Type HL,SELV, and RoHS
• cULus Listed
• Conforms to UL 8750,CAN/CSA-C22.2 No. 250.13, and FCC
• Clearly marked input and output wiring
• Requires wire rated for at least90°C (194°F)

The MX12200 DC Transformer 200 Watt Constant Voltage LED Driver is a dependable low-voltage power supply engineered to provide stable12V DC output for compatible LED lighting systems. Designed for professional lighting applications, this unit is labeled as a dimmable LED driver with phase dimming capability and is intended for use with forward phase and reverse phase dimmers, including ELV, MLV, and Triac dimmers.

Built as constant voltage driver, the MX12200 accepts a wide110–277V AC input range and converts it to12V DC output, delivering up to16.6Awith a maximum load of200W. This makes it suitable for LED applications that require higher wattage capacity while maintaining consistent low-voltage power delivery.

According to the MX12200 DC Transformer 200 Watt label, this driver is suitable for dry, damp, and wet locations, offering flexibility for a wide variety of installation environments when used in accordance with applicable codes and proper installation practices. The unit is also marked Class P,Type HL,SELV, and RoHS, and is cULus Listed. In addition, the label states that it conforms to UL 8750,CAN/CSA-C22.2 No. 250.13, and FCC requirements.

For wiring identification, the input side is labeled AC L (Black),AC N (White), and Ground (Green). The output side is marked LED + (Red)and LED – (Black). The label also clearly states that all connections must use wire rated for at least 90°C (194°F).

The MX12200 DC Transformer 200 Watt is an excellent option for projects requiring a12V DC constant-voltage dimmable LED driver with broad dimmer compatibility, recognized compliance markings, and increased wattage capacity for larger low-voltage LED installations.

Installation Note

The product label identifies the wiring as follows:

Input

• Black= AC L
• White= AC N
• Green= Ground

Output

• Red= LED +
• Black= LED –

For connections, the label states that installers must use wire rated for at least 90°C (194°F).