• Dimmable constant-voltage LED driver
• Supports phase dimming
• Compatible with forward phase and reverse phase dimmers
• Label lists compatibility with ELV, MLV, and Triac dimmers
• Converts100–277V AC inputto12V DC output
• Delivers up to100W max
• Provides up to8.33A output
• Suitable for dry, damp, and wet locations
• Marked Class P,SELV, Type HL, and RoHS
• cULus Listed
• Conforms to UL 8750,CAN/CSA-C22.2 No. 250.13, and FCC
• Clearly labeled input and output wire identification
• Requires connection wiring rated for at least90°C (194°F)

The MX12100 DC Transformer 100 Watt Constant Voltage LED Driver is a professionally engineered low-voltage power supply designed to deliver stable12V DC output for compatible LED lighting applications. Built for dependable performance and broad dimmer compatibility, this LED driver supports phase dimming and is labeled for use with forward phase and reverse phase dimmers, including ELV, MLV, and Triac dimmers. This makes it a practical solution for projects requiring smooth dimming control and consistent low-voltage LED operation.

Designed as a constant voltage driver, the MX12100 converts a wide100–277V AC input range into12V DC output, providing up to8.33 amps and a maximum load of100 watts. Its wide input voltage range allows it to be used in a variety of installation environments where reliable voltage conversion is essential for proper LED system performance.

According to the product label, this driver is suitable for dry, damp, and wet locations, offering installation flexibility when used appropriately and in accordance with applicable electrical codes and fixture requirements. The unit is also marked Class P,SELV, Type HL, and RoHS, and is cULus Listed. The label further states that it conforms to UL 8750,CAN/CSA-C22.2 No. 250.13, and FCC requirements.

For installation reference, the input wiring is clearly identified on the label as AC L (Black),AC N (White), and Ground (Green). The output wiring is marked LED + (Red) and LED – (Black). The label also specifies that for connections, installers must use wire rated for at least 90°C (194°F), an important requirement for safe and code-conscious installation.

The MX12100 DC Transformer 100 Watt is a strong choice for applications requiring a 12V DC constant-voltage dimmable LED driver with recognized compliance markings, broad dimmer compatibility, and dependable low-voltage output performance.

Installation Note

This MX12100 DC Transformer 100 Watt label specifies the following wiring identification:

Input

• Black= AC L
• White= AC N
• Green= Ground

Output

• Red= LED +
• Black= LED –

For connections, the label states that installers must use wire rated for at least 90°C (194°F).