Exhaust System Kit; 0FG Cat-Back System; Stainless Steel; With Muffler; Single Exhaust With Single Exits; Rear Exit; With Dual Diamond Black Tips

Rugged where it matters most.

Presenting the 0FG Exhaust Suite for the '24+ Toyota Tacoma 2.4T:

The 0FG Exhaust:

Single 3” American-sourced T304L stainless steel with a wall thickness of .065” runs smoothly from front to back, featuring a factory-matched flange at the inlet, bolting up right after the emissions equipment. A bespoke, straight-through, dual resonated midpipe brings life to the 2.4T. Equipped with AWE’s patented drone-canceling 180 Technology® for in-cabin comfort, and an additional, tailored resonator responsible for keeping the tones rich and deep, the 0FG provides a proper soundtrack regardless of where you are in the rev range. Each 0FG Catback features modular extensions for long wheelbase Tacomas, and they’re included in every kit.

Perfect tone, compliments of AWE 180 Technology®.

Keeping the aggression at the rear of the Tacoma, and out of the cabin, is AWE’s patented drone-canceling solution, 180 Technology®.

As exhaust gasses exit the 2.4T engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.

Full-bodied aggression remains behind the driver, and complete comfort is achieved in the cabin at cruising speeds, all while unlocking a superior soundtrack and optimal flow compared to stock.

BashGuard™ & Dual Tips:

Drivers have the option between AWE’s high-clearance BashGuard™ configuration or dual 4.5” tip configuration.

BashGuard™: What’s BashGuard? Thanks for asking. The AWE BashGuard™ is appropriately equipped with a .125” thick reinforced stainless ring of the exhaust outlet, tucked up really high out of the way of danger. This configuration is barely visible when looking at Tacoma on the ground, and quite literally impossible for any of Earth’s obstacles to reach.

Dual Tip: Signature 4.5” slash-cut, double-walled tips are available in chrome silver or diamond black for drivers who want the look to match the exhaust note. The dual tips reside in the factory location, aligning with the left side of the rear bumper perfectly. Each tip is individually adjustable allowing depth into the bumper to be set according to personal taste.

100% emission-friendly:

The 0FG does not interfere with any factory emissions equipment.

Made in PA, USA:

Engineered, designed, and manufactured in-house at AWE.

WARRANTY

Sale

AWE Exhaust Suite For The Gen 4 Toyota Tacoma

Rugged where it matters most. Presenting the AWE 0FG Exhaust Suite for the Gen4 Toyota Tacoma:

Fits Hybrid and Non-Hybrid Models
50-state emissions-compliant 3” catback configuration available with rugged high-clearance BashGuard™ or dual 4.5” tips
Handcrafted from CNC mandrel-bent 3" U.S.-sourced .065” wall T304L stainless steel
Bespoke resonated midpipe featuring AWE’s patented drone-canceling 180 Technology® for maximum comfort on the highway
Factory-matched inlet flange for ease of installation
High-clearance BashGuard™ configuration ends after the rear axle making it street-legal, and features an extra thick reinforced stainless ring on the outlet, built for bashing
4.5” double-walled slash-cut tips available in chrome silver or diamond black
Wheelbase extensions are included with every kit
Less is more: clean, straight-through design maximizes performance
Direct bolt-on, no cutting required
Manufactured in-house at AWE
AWE No CEL Guarantee
AWE Perfect Fitment Guarantee
AWE Lifetime Warranty

IMPORTANT FITMENT NOTES THAT YOU SHOULD READ:

Will not fit Limited i-Force Max model because of the Full-time 4-wheel drive with electronic locking center differential.
Not designed for models with leaf springs.

AWE 0FG Exhaust for 4th Gen Toyota Tacoma - BashGuard Only

AWE 0FG Exhaust for 4th Gen Toyota Tacoma - BashGuard Only

(SKU: 3015-28254)

FITMENT GUARANTEE

NO CEL, GUARANTEED

50 STATE LEGAL

180 TECHNOLOGY

NO TUNE REQUIRED

$1,257.89$1,195.00

AWE 0FG Exhaust for 4th Gen Toyota Tacoma - 4.5” Dual Chrome Silver Tips

AWE 0FG Exhaust for 4th Gen Toyota Tacoma - 4.5” Dual Chrome Silver Tips

(SKU: 3015-32254)

FITMENT GUARANTEE

NO CEL, GUARANTEED

50 STATE LEGAL

180 TECHNOLOGY

NO TUNE REQUIRED

$1,447.37$1,375.00

AWE 0FG Exhaust for 4th Gen Toyota Tacoma - 4.5” Dual Diamond Black Tips

AWE 0FG Exhaust for 4th Gen Toyota Tacoma - 4.5” Dual Diamond Black Tips

(SKU: 3015-33254)

FITMENT GUARANTEE

NO CEL, GUARANTEED

50 STATE LEGAL

180 TECHNOLOGY

NO TUNE REQUIRED

$1,447.37$1,375.00

MAKE	MODEL	YEAR	SUBMODEL	ENGINE	BODY TYPE	BED LENGTH
Toyota	Tacoma	2024-2026	Limited	2.4	Crew Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	SR5	2.4	Crew Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	SR5	2.4	Crew Cab Pickup	6' 0''
Toyota	Tacoma	2024-2026	SR5	2.4	Extended Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	SR5	2.4	Extended Cab Pickup	6' 0''
Toyota	Tacoma	2024-2026	Trailhunter	2.4	Crew Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	Trailhunter	2.4	Crew Cab Pickup	6' 0''
Toyota	Tacoma	2024-2026	TRD Off-Road	2.4	Crew Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	TRD Off-Road	2.4	Crew Cab Pickup	6' 0''
Toyota	Tacoma	2024-2026	TRD Pro	2.4	Crew Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	TRD Sport	2.4	Crew Cab Pickup	5' 0''
Toyota	Tacoma	2024-2026	TRD Sport	2.4	Crew Cab Pickup	6' 0''
Toyota	Tacoma	2025-2026	TRD Sport Premium	2.4	Crew Cab Pickup	5' 0''

DetailsInstallation InstructionsLifetime Exhaust Warranty180 TechnologyNo CEL GuaranteeFitment Guarantee

Summary

The AWE Lifetime Exhaust Warranty on select AWE exhaust products protects against manufacturer defects. Manufacturer defect is defined as any characteristic of the product which hinders its usability for the purpose for which it was designed and manufactured. The warranty against manufacturer defects doesn’t cover any cosmetic changes, or normal use wear and tear. All warranties cease at a product’s discontinuance. This applies only to AWE brand exhaust tubing, welding, flex areas.

Covered

Original owner.

Period

AWE brand exhausts: Tubing, welding, flex areas: Lifetime
Valves on exhausts: Three-years on mechanical components, one year on valve motors
Electronics / Electronic Components found on any product: One year*
Catalysts: One Year
Tip finish defects (please follow washing instructions prior to contacting support): One year (see Tip Finish below)
Intakes (all components): One year
Filters: One year
Intercoolers: One year
Other: Foilers, accessories, tools, valances, drive train stabilizers, suspension components: One year
Turbo kits/turbochargers: Not covered under warranties, special order item.