Evo Connected 3

Channel 1: Pulse/Dimming
Channel 2: Pulse/Dimming
Channel 3: On/Off

If your vivarium has two heat sources, this model is for you. Our favourite use will be the ability to run a secondary nighttime or background heater within the enclosure and control it with the same thermostat.

The Microclimate EVO Connected Thermostat is one of the reptile markets most exciting and highly anticipated products in years and is set to take reptile keeping to a whole new level.

In summary this thermostat has it all..

Multiple channels to control heating and lighting and monitor temperatures
Timing modes (per channel)
- Simple: Constant or Day & Night
- Advanced: Multi 8 Settings, Periodic, Seasons
All new high quality, colour, capacitative touch screen with large easy to read display
IP Rated waterproof sensor on every channel (2.5m cables)
Seasons Mode allows the recreation of a whole years environmental cycle
Ramp Times: control the length of time between temp changes for more natural climate control
Power output level shown per channel
Visual and Audible Alarms
Real time fault detection
Built in mounting solution for both the display and main control box allowing for easy, secure installation
Customise channel and thermostat names
Single Cable to the display allowing other cables to be kept out of sight with the main control box

Wifi Connectivity allowing real time monitoring and control of your enclosures from anywhere in the world (via iOs or android apps)
Web Browser remote dashboard
Cloud connectivity with 12 months of data logging for each channel on the app
Push notifications if an alarm is triggered, there is a power cut or your thermostat goes offline
Over the air updates included to keep your thermostat up to date
Generate reports for your whole collection and export the data to csv file
View multiple thermostats on one app

(note wifi is needed for app or cloud features)

1200w max load (600w max per channel)
Designed and manufactured in the United Kingdom
Full 5 Year Warranty

Evo Connected 2

Channel 1: Pulse/Dimming
Channel 2: On/Off

This model is perfect for a vivarium with a single heat source (e.g. a basking light or ceramic bulb) and a separate UVB lighting system (e.g. a UVB light source). In this scenario you would get complete automation of the day and night cycles and temperature readings on both sensors, allowing you to simultaneously record temperatures in two different areas of the vivarium.

The second channel can also be used as an on/off thermostat if preferred.