Latex Paint Remover

Breaks the Molecular Bond™ between stain and surface 

The patented formula of Lift Off® Breaks the Molecular Bond™ for fast, easy removal of latex paint and latex enamel from walls, trim, molding, floors, wood, vinyl, tile, laminate, metal, brick, concrete, and vehicles.

Lift Off® will not melt or dissolve paint, leaving paint solid and intact for safe and easy clean-up and disposal.

Environmental Facts: Water-based, biodegradable formula with low VOC content. Contains less than half the regulated VOC limit.

Tips and Tricks:

Use caution on painted, colored, or treated concrete and other surfaces. Lift Off® may remove these.

For Hard Surfaces:

• Test in an inconspicuous area to ensure surface integrity and compatibility.
• Spray area and wait at least 60 seconds.
• Agitate with a soft brush if necessary.
• Wipe with a clean white cloth or rinse clean if possible. Repeat if necessary.

For Porous Surfaces:

• Test in an inconspicuous area to ensure surface integrity and compatibility.
• Spray area and wait at least 3 minutes.
• Agitate with a soft brush if necessary.
• For best results remove paint with a high pressure water system set at 1200 psi or greater working from bottom to top. Repeat if necessary.

For Vehicles:

• Test on an inconspicuous area.
• Spray directly onto area with graffiti or paint transfer.
• Wipe immediately with clean, white cloth.
• Do not allow Lift Off® to remain on vehicle for more than 5-10 seconds at a time.
• Completely wash Lift Off® from vehicle after treatment. Repeat if necessary. Avoid applying Lift Off® to vehicles in direct sunlight.