🐙 CUT LINE | Black Oxide Carbon Steel | The Den
Every tournament has a number. Shoot it, and you play the weekend. Miss it by one, and you're packing the car Friday afternoon while someone else takes your tee time.
You don't repair a pitch mark with this. You make the cut. It comes out of your pocket black as a closed course at midnight, and the green goes quiet for a breath. There's no polish and no shine, just carbon steel that looks like it means business.
The scissor form is the lie. Slim, elegant, almost delicate between two fingers. Then you turn it over and find KRAKEN cut down the full length of the blade in Oswald capitals, laser-marked through the black oxide to the bare steel underneath. A single small Kraken mark sits on the front at the pivot. The form is refined. The finish is not. That tension is the whole point.
Machined from solid carbon steel and finished in black oxide. The marks aren't printed or painted. The laser burns away the finish to reveal the raw metal, so the brand is literally what's underneath. And it doesn't stop there. Carbon steel is a living metal. Over time the oxide will wear at the edges and contact points where your fingers find it, and the steel will start showing through. Every round leaves its mark. Five years from now, nobody else's will look like yours.
You don't buy a golf pitch tool. You buy proof you made the cut.
CUT LINE is part of The Den. Once it sells out, the design is retired permanently to the Vault. There won't be another.
🎯 SPECS & FEATURES
- Material: Solid carbon steel, CNC machined
- Length: 3.00"
- Width at widest: 1.67"
- Thickness at spine: 3/16"
- Weight: 23g
- Finish: Black oxide
- Front: Kraken mark, laser-marked to bare steel
- Back: Oswald "KRAKEN" wordmark down the blade, laser-marked to bare steel
- Edition: Den drop, retired forever once sold out
- Promenade: Numbered certificate of authenticity included
🛠 CARING FOR CARBON STEEL
Carbon steel isn't stainless. It's the same steel used in heirloom knives and classic tools, and it rewards a little attention.
- It ships oiled. That thin film is what protects the steel. Leave it on.
- Wipe it dry after the round, especially after wet grass, rain, or morning dew.
- Re-oil every few weeks, or after it gets wet. A drop of mineral oil, gun oil, or 3-in-1 rubbed on with a soft cloth does the job.
- Store it dry. A pocket or a pouch is fine. A damp bag pocket for a month is not.
- If you see surface rust, rub it out with a few drops of oil on a soft cloth, then wipe and re-oil.
- Expect wear. Bright steel showing through the black oxide at the edges is patina, not damage. It's the tool becoming yours.
Some guys go home Friday.
Limited drop. Once it's gone, it's gone.